Product SKUs |
MBD-X9SCM-iiF -B |
X9SCM-iiF (Bulk Pack) |
Physical Stats |
Form Factor |
uATX |
Dimensions |
9.6" x 9.6", (24.4cm x 24.4 cm) |
Processor/Cache |
CPU |
- Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** *
- Socket H2 (LGA 1155)
|
System Memory |
Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
8GB, 4GB, 2GB, 1GB |
Memory Voltage |
1.5 V |
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset |
Intel® C204 PCH chipset |
SATA |
- 4x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10
- 2x SATA3 (6Gb/s) w/ RAID 0, 1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® 82574L, 2x Gigabit LAN ports
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
BMC integrated Matrox G200 |
Super I/O |
Nuvoton NCT6776F |
Input / Output |
Serial ATA |
- 6 SATA ports
- 6 SATA hard drives supported
|
LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A)
|
VGA |
1x VGA port |
Serial Port / Header |
2x Fast UART 16550 serial port
(one header and one rear port) |
DOM |
1x DOM (Disk on Module) power connector |
TPM |
1x TPM 1.2 20-pin Header |
Expansion Slots |
PCI-Express |
- 2 (x8) PCI-E 3.0 in x8 slots***
- 2 (x4) PCI-E 2.0 in x8 slots
|
System BIOS |
BIOS Type |
64Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 4.0
- PCI 2.3
- USB Keyboard support
|
Management |
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
- Intel Node Manager Support
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
PC Health Monitoring |
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|