- Home
- >Networking
- >Network Accessories
Network Accessories
By Category
Featured Products See All
NETGEAR SFP+ Transceiver, 10GBase-SR for multimode 50/125µm OM3 or OM4 fiber | ...
$339 .99
Free Shipping
- Adds 10 Gigabit Ethernet “short-reach” fiber connectivity to the two built-in 10 GE SFP+ interfaces of GSM73xxSv2
- Adds 10 Gigabit Ethernet “short-reach” fiber connectivity to the GSM73xxS/GSM73xxSv2 via the AX743 SFP+ Adapter module
- Drive 10 Gigabit Ethernet up to 300m
- LC connector and “short-reach”
- Drives 10 Gigabit Ethernet up to 300m distances with 50/125µm OM3 multimode fiber cables
$339 .99
NETGEAR SFP 1G Ethernet Fiber Module for Managed Switches | AGM731F
Free Shipping
- Fits into SFP interfaces of all NETGEAR Fully Managed Switches.
- Drives Gigabit Ethernet up to 275 m distances with 62.5/125ìm OM1 multimode fiber cables, up to 550 m distances with 50/125µm laser-optimized OM3 multimode fiber cables LC duplex connector.
- Provides full-duplex 1000Mbps Ethernet operation in each direction for NETGEAR managed switches.
- Automatically detects the module, so you can simply plug it into an available module slot.
TP-Link TL-PoE170S | 802.3at/af/bt Gigabit PoE Injector | Non-PoE to PoE Adapter | Supplies ...
$60 .94
- With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE170S Experience lightning-fast wired speeds with 1x Gigabit Ethernet Input Port + 1x Gigabit Ethernet Output port TL-PoE170S supplies power and data via one single ethernet cable to 802.3 at/af/bt PoE devices and expands network to areas with no power lines or outlets Easy setup with no software installation or configuration needed Deliver Power up to 100 meters (328 ft.), perfect for IP cameras or access point deployment in large areas With Auto Detect technology, TL-PoE170S delivers up to 60W to a PoE++ device with backwards compatibility for 802.3at PoE+ (30W) and 802.3af PoE (15.4W) devices
StarTech.com Gigabit Ethernet Fiber Media Converter - Compact - 850nm MM LC - 550m - With ...
$94 .34
- Convert between an RJ45 copper Ethernet connection and a fiber optic connection to extend your network cost-effectively
- 10/100/1000 Mbps RJ45 port supports auto negotiation to bridge different network speeds and devices to a Gigabit fiber network
- Compact standalone design and wall mounting option for easy and convenient installation
- 850nm LC multimode Gigabit fiber connection using the included SFP transceiver
- 550m range on fiber optic interface
- Link Fault Pass (LFP) supported
- Durable metal housing
- Supports IEEE 802.1q Tag VLAN pass through
- Auto MDIX
- 9K Jumbo Frame supported
Cisco Twinax Cable, 9.84ft
Free Shipping
- Connector Type on First End: SFP+ Network
- Connector Gender on First End: Male
- Connector on First End Details: 1 x SFP+ Network
- Connector Type on Second End: SFP+ Network
- Connector Gender on Second End: Male
- Connector on Second End Details: 1 x SFP+ Network
- Conductor: Copper
- Device Supported: Network Device
StarTech.com Cisco GLC-T Compatible SFP Module, 1000BASE-T RJ45 Copper, 10 Pack
$355 .71
Free Shipping
- With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable
- Gigabit Ethernet port for ultra-fast network speeds
- Up to 10x faster than standard Ethernet connection and provides high-performance
- Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer
- Twisted Pair media support for efficient and reliable connectivity
- Twisted Pair media support for a dependable and productive connectivity
- SFP (mini-GBIC) offers better usage with maximum efficiency and convenience
- SFP (mini-GBIC) offers enhanced dependability with maximum productivity
- SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability
- SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency
- Hot-pluggable form factor for added reliability and dependability
- Hot-pluggable form factor allows hassle-free and easy usage with increased efficiency
StarTech MCM110SC2 10/100Mbps Fiber to Ethernet Media Converter - Multi Mode - SC - 2km - ...
$74 .99
Free Shipping
- Supports a maximum multi mode fiber optic cable distance of 2 km
- Compatible with most 3com, Cisco, Lucent and Nortel networks
- Compact design
- Supports transparent Q-in-Q double tagged frames
- Supports Link Fault Pass through (LFP)
- Supports IEEE 802.1q Tag VLAN pass thru
- Supports flow control (Pause)
- Provides switch configuration of half/full duplex transfer mode for FX port
- LED Indicators for simple Ethernet/Fiber network link monitoring
- Forward 9K jumbo packets in converter mode
$74 .99
Ubiquiti PoE++ Adapter (60W) (U-PoE++)
$32 .99
- An adapter that can power UniFi PoE++ devices with wireless mesh applications, or offload PoE switch power dependencies.
- Compatibility: UVC-G4-PTZ, UA-G2-SK-Pro, UA-Hub-Door, UA-G2-SK, U6, Enterprise-IW, UC-Display, UA-SK-Elevator
$32 .99
D-Link DEM-431XT 10GBase-SR SFP+ Transceiver 10 Gbps Duplex LC Connector
$60 .31
Free Shipping
- 10 Gbps Duplex LC Connector
Cisco® SFP-10G-LR-S Compatible TAA 10GBase-LR SFP+ Transceiver (SMF, 1310nm, 10km, ...
$282 .99
Free Shipping
- Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology
- Optical Fiber media support for a dependable and productive connectivity
- For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution
- SFP+ offers better usage with maximum efficiency and convenience
- SFP+ with data networking application/usage for maximum productivity and usability
- Hot-swappable form factor allows hassle-free and easy usage with increased efficiency
- 10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility
$282 .99
TP-LINK TL-PoE160S | 802.3at/af Gigabit PoE Injector | Non-PoE to PoE Adapter | Supplies PoE ...
$31 .86
- Convert Non-PoE to PoEWith no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE160S Gigabit Ports Ensures High SpeedExperience lightning-fast wired speeds with 1 x Gigabit Ethernet Input Port + 1 x Gigabit Ethernet Output port 802.3at/af PoE Compliant TL-PoE160S supplies power and data via one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets Plug and PlayEasy setup with no software installation or configuration needed Long Range TransmissionDeliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas Auto DetectWith Auto Detect technology, TL-PoE160S delivers up to 30W to a PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.
Loading Dynamic Data...
