Support USB1.1 and USB 2.0 devices, Such as Cameras, Printers, Scanners, Audio devices, USB touch screens, Game Controllers, Mouse and Keyboard Dongle, FTDI RS232 Converter, FPGA Programmer, USB video capture device, Orientalmotor Controller, USB Wireless Dongle, USB headset, USB to RS232 Adapter,Arbitrary Waveform Generator 33250A & 82357B, Oscilloscope Kit, Data Acquisition Device (DAQ), Audio DAC(but Except RME's), Akai APC devices etc.
4 ports USB 2.0 extend to 1 port over Fiber, or 1 port USB 2.0 splitted to 4 Ports USB 2.0
Extending USB 2.0/1.1 Devices over Max 5 Kilometers 2 Cores Single-mode Fiber
Pure hardware design, no driver needed, compatible with all operation systems, support plug and play
Auto recognition of High-speed25Mbps480MbpsFull-speed500Kbps12MbpsLow-speed10Kbps1.5MbpsUSB device.
Power-up sequence: Because of USB status (Suspend and Resume), Both the the computer and the USB device it's being connected to should be shut down completely BEFORE making all the connections. The USB devices and the transmitter module it's connected to must both be powered up and running BEFORE the computer is booted up. Otherwise, the USB device's driver in the computer will not be loaded, and the devices will not connect. In case the USB device's driver shows can not Identify the Device or shows "Unknown Device", please unplug and plug the receiver module.
4 ports USB 2.0 extend to 1 port over Fiber, or 1 port USB 2.0 splitted to 4 Ports USB 2.0
Extending USB 2.0/1.1 Devices over Max 5 Kilometers 2 Cores Single-mode Fiber
Pure hardware design, no driver needed, compatible with all operation systems, support plug and play
Auto recognition of High-speed25Mbps480MbpsFull-speed500Kbps12MbpsLow-speed10Kbps1.5MbpsUSB device.
Power-up sequence: Because of USB status (Suspend and Resume), Both the the computer and the USB device it's being connected to should be shut down completely BEFORE making all the connections. The USB devices and the transmitter module it's connected to must both be powered up and running BEFORE the computer is booted up. Otherwise, the USB device's driver in the computer will not be loaded, and the devices will not connect. In case the USB device's driver shows can not Identify the Device or shows "Unknown Device", please unplug and plug the receiver module.
