Specifications:
Product Size:120x120x25mm
Pitch: 10.5cm
Rated Voltage:12VDC
Rated Current: 0.25A
Speed of the Fan: 1200±10%RPM
Max Air Flow: 50 CFM
Noise: <25dBA
Bearing Type: Hydraulic Bearing
Cable length: 30cm / 11.8in
Power Interface:3 Pins to mainboard / 4 Pins to Molex
Package Included:
2 X 120mm Case Fans
8 X Fan Screws
1.Shockproof Design:
There are fixed shock-absorbing soft pads on both sides of the fan frame. The installation is more stable and can buffer and absorb the vibration caused by the operation of the fan.Peace and quiet even when your PC is working overtime.
2.Perfect Cooling Performance:
powerful fan speeds up to 1200 RPM,Maximum Air Flow (50 CFM) to cool off the air inside your case, the 7 blade design, balance air volume, and wind pressure provide you strong heat dissipation.
Instructions:
1. 3-pin power connector for powered by motherboard
2. IDE 4-pin power connector for powered by PSU power supply
3. Support multiple fans through IDE 4Pin Concatenation.
IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.
Easy to Install and use:
This RGB fan is easy to install and does not require a controller.They can be installed on the front, top or bottom of the chassis, according to the user's preference.
Two Way Installation:
Blow warm air out of the case. Draw cool air into your case. Provide excellent ventilation for your PC cases.
Product Size:120x120x25mm
Pitch: 10.5cm
Rated Voltage:12VDC
Rated Current: 0.25A
Speed of the Fan: 1200±10%RPM
Max Air Flow: 50 CFM
Noise: <25dBA
Bearing Type: Hydraulic Bearing
Cable length: 30cm / 11.8in
Power Interface:3 Pins to mainboard / 4 Pins to Molex
Package Included:
2 X 120mm Case Fans
8 X Fan Screws
1.Shockproof Design:
There are fixed shock-absorbing soft pads on both sides of the fan frame. The installation is more stable and can buffer and absorb the vibration caused by the operation of the fan.Peace and quiet even when your PC is working overtime.
2.Perfect Cooling Performance:
powerful fan speeds up to 1200 RPM,Maximum Air Flow (50 CFM) to cool off the air inside your case, the 7 blade design, balance air volume, and wind pressure provide you strong heat dissipation.
Instructions:
1. 3-pin power connector for powered by motherboard
2. IDE 4-pin power connector for powered by PSU power supply
3. Support multiple fans through IDE 4Pin Concatenation.
IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.
Easy to Install and use:
This RGB fan is easy to install and does not require a controller.They can be installed on the front, top or bottom of the chassis, according to the user's preference.
Two Way Installation:
Blow warm air out of the case. Draw cool air into your case. Provide excellent ventilation for your PC cases.
