(12) | Write a Review
It is equipped with the latest USB3.2 Gen2 master chip, and can support up to 20Gbps transmission bandwidth
ORICO Lighting-Speed Data Transmission

The Omnispeed technology standard is based on USB Type C interface, which is divided into four standards: 5, 10, 20 and 40, corresponding to the ultra-high transmission speeds of 5Gbps, 10Gbps, 20Gbps and 40Gbps respectively.

Applicable SSD
  • Compatible with four different specifications of M.2 NVME 2230,2242,2260,2280 SSD, up to 2000 MB / s transmission rate.
  • Up to 2000MB/s transfer rate, giving you a different high-speed experience. 
     
Intelligent Sleep Technology
  • After 10 minutes, the hard disk enclosure will automatically switch to the sleep state to minimize the damage to the hard disk. 
  • The LED indicator monitors the working status of the hard disk at any time. 
What in the Box
  • 1 X ORICO 20Gbps hard drive enclosure
  • 1 X Silicone thermal pads
  • 1 X Screwdriver 2 X Screw
  • 1 X Type-C to Type-C cable
  • 1 X Type-C to USB 3.2 cable
  1. Unscrew the screw and open the cases
  2. Tighten the screws to fix the SSD and install screws on the back of PCBA board
  3. Align the interface and screw the enclosure

The M.2 enclosure can be used to connect to PCs, laptops, smart TVs, smart routers, PS4 and other devices.