(1) | Write a Review
Supermicro H11SSL-NC

Designed to handle complex computing workloads, the Supermicro MBD-H11SSL-NC comes pre-installed with AMD EPYC Rome 7702P processor, a new server supercharger that provides unparalleled performance and efficiency. You only need to add the components needed, such as ECC DDR4 memory, graphics card and SAS/SATA/NVMe storage, to build a powerful system that helps you take the lead in your industry.

EPYC

2nd Gen AMD EPYC CPUs are a new breed of server processors which sets a higher standard for datacenters.

Power for Excellence

Based on cutting-edge "Zen 2" architecture and built using advanced 7nm process technology, the all-new AMD EPYC Rome 7702P processor brings far more instructions per cycle (IPC) throughput, more cores and more cache into a smaller area, and more energy efficiency when compared to the previous generation. No server application is heavy with the power of its 64 cores (128 threads) running at up to 3.35 GHz.


Farewell to Memory Insufficiency

High server workload is great to grow your business. But heavy traffic puts an exacting demand on your hardware. Designed with that in mind, this server motherboard is ready to take huge-capacity memory with its eight DIMM memory slots. You can install up to 1TB registered ECC DDR4 2666 MHz SDRAM memory.


Expand for Brilliance

With three PCI-E 3.0 x16 slots and three PCI-E 3.0 x8 slots, you can add various combinations of graphics cards and add-on cards for high-performance computing.


Future Ready Storage

In addition to eight SAS3 (12 Gbps) ports and eight SATA3 (6 Gbps) ports, the motherboard also features a M.2 slot, letting you install super-fast PCI-E 3.0 x4 solid state-drive in 2280, or 22110 form factor.

Gallery
top
rear
Specifications

Physical Stats
Form Factor ATX
Dimensions 12" x 9.6" (30.5cm x 24.4cm)
Processor/Cache
CPU
  • Single AMD EPYC 7000-series Processor
  • Socket SP3
Cores Up to 32 Cores
Chipset System on Chip
System Memory
Memory Capacity
  • 8 DIMM slots
  • Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
  • 8-channel memory bus
Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
SATA SATA3 (6 Gbps)
SAS
  • Broadcom 3008 SAS3 (12 Gbps) controller
  • RAID 0, 1, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • 2 1GbE LAN via Intel I210
  • 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA ASPEED AST2500 BMC
Input / Output
SAS 8 SAS3 (12 Gbps) ports
SATA 8 SATA3 (6 Gbps) ports
NVMe 2 PCI-E 3.0 NVMe x4 Internal Ports
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 5 USB 3.0 ports (2 rear + 2 via header + 1 Type A)
  • 4 USB 2.0 ports (2 rear + 2 via header)
VGA 1 VGA port
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connector
  • 1 TPM 2.0 header
Expansion Slots
PCI-Express
  • 3 PCI-E 3.0 x8
  • 3 PCI-E 3.0 x16
M.2
  • Interface: PCI-E 3.0 x4
  • Form factor: 2280, 22110
  • Key: M-key
Chassis
1U
  • SC813MFTQC-350CB2
  • SC813MFTQC-R407CB
2U
  • SC213AC-R1K23LPB
  • SC216BE1C4-R1K23LPB
  • SC825TQC-R740LPB
  • SC826BE1C4-R1K23LPB
3U SC836BE1C-R1K23B
4U
  • SC745BAC-R1K28B2
  • SC846BE1C-R1K23B
System BIOS
BIOS Type AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
Management
Software
  • Super Doctor 5
  • Watch Dog
  • NMI
  • SUM
  • IPMI 2.0, KVM with dedicated LAN
Power Configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
  • CPU switching voltage regulator
  • Supports system management utility
  • VBAT
FAN
  • Up to 7-fan status tachometer monitoring
  • Up to 7 4-pin fan headers
  • Dual Cooling Zone
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 7x Fan connectors
  • I2C Temperature Sensing Logic
LED CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
  • UID
Operating Environment / Compliance
Environmental Specifications
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)