OCP NIC 3.0 Small Form Factor
PCI-Express host interface specification v3.0 with 8GT/s Bus width and backward compliant with 2.0 and 1.x
PCI-Express interface: x8
Complies with Dual 10GbE RJ45 port
Integrate BASE-T ports capable of operating at 100/1G/2.5G/5G/10GBASE-T
Full-duplex operation at all supported speeds
Maximize link capacity when operating at 10Gb/s link with packets larger than 128 bytes at full duplex traffic
PCI-SIG SR-IOV implementation 128 per device
Supports Receive-side scaling (RSS)
Supports Jumbo Frames up to 9K
Supports Tx/Rx IP, SCTP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities
Next-generation VMDQ up to 256 maximum VMDQ VMs supported
Virtual machine load balancing
Advanced packet filtering
VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags
Drivers support for FreeBSD, Linux , VMWare ESXi, Win10/Win11/Win-server208/ Win-server202/Win-server2016/Win-server2019/Win-server2022
Feature tab
Product Name OCP3.0 Intel X710-T2L Dual-Port 10G Network card
Bus type OCP3.0 SFF with PCIe Gen 3.0 (8.0GT/s) through an x8 edge connector, Gen2 compatible
Controllers Intel X710-T2L
Interrupt Levels INTA, MSI, MSI-X
Transmission Media Copper: 2.5GBASE-T and 5GBASE-T :100m using CAT5e,CAT6,or CAT6A
10GBASE-T 55m using CAT6, 100m using CAT6A
100BASE-TX and 1000BASE-T:100m using CAT5e,CAT6, CAT6A
Link speeds of per port 100Mbps/1GbE/2.5GbE/5GbE/10GbE
Port number 2 ports
Operating Temperature 0 °C to 55 °C (32 °F to 131 °F)
Airflow 100m: 35 °C to 40 °C,
350LFM-400LFM recommended
Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F)
Storage Humidity Maximum: 90% non-condensing relative
humidity at 35 °C
LED Indicators LINK (green = 10Gbps; yellow = 5/2.5/1Gbps;
off = 100Mbps)
ACT (blinking green = transmitting or receiving
data; off = no link)
Virtualization features VMDQ,PCI-SIG,SR-IOV, Virtual machine load balancing advanced packet filtering, VLAN, VxLAN, GENEVE, NVGRE, MPLS, VxLAN -GPE,NSH
Manageability PXE, UEFI, SNMP,
Package content
1 x OCP3.0 Intel X710T2L Dual-Port 10G Ethernet adapter
1 x Users Manual
1 x CD Driver
System Requirements
Microsoft Windows: Win10/Win11/Win-server208/ Win-server202/Win-server2016/ Win-server2019/ Win-server2022
Linux:RHEL7.9/8.4/8.5,SLES12SP5,SLES15SP3,Ubuntu18.04LTS/ 20.04LTS,FreeBSD 12.2/13
An available OCP3.0 SFF slot
Hardware installation
1. Turn off the computer and unplug the power cord.
2. Remove the adapter slot cover from the OCP3.0 slot that matches your adapter.
3. Push the OCP3.0 adapter card inward along the track of the slot until the bracket is level with the chassis and lock the screws to secure it.
4. Power on the computer
Install Drivers and software
Windows Operating Systems
You must have administrative rights to the operating system to install the drivers.
1.insert the CD driver bound with Intel network driver into your CD-ROM drive (also you can download the latest drivers from support website):
2.if the Found New Hardware Wizard screen is displayed, click Cancel
3.start the autorun located in the software package, the autorun may automatically start after you have extracted files.
4.Click install Drivers and Software
5.Follow the instructions in the install wizard to finish it
Installing Linux Drivers from Source Code
1.Download and expand the base driver tar file.
2.Compile the driver module
3.Install the module using the modprobe command
4.Assign an IP address using the ifconfig command
Support
More information and settings, please refer to the Intel Adapter User Guides or you can contact us.
