The FlipMods Ultra V3 by Sacred Labs is an 18-pin board that connects to the GPIO on top of the Flipper Zero device, a versatile multi-tool for exploring and testing digital systems. Sits flat on top to give it a sturdy feel and sleek look. This board features an ESP32-WROOM-32UE chip with Marauder firmware pre-loaded, enabling advanced wireless capabilities. There is a CC1101 to use for Subghz purposes and an NRF24 for Sniffer applications. Use the switch on the left of the board to select whether to use the NRF24 or CC1101. The ESP32 will always remain on as long as power is supplied to the board.
With a USB-C port for firmware updates and a micro SD card slot for the Marauder application, it offers flexibility and customization options. Whether you're a security researcher or tech enthusiast, the FlipMods Ultra V3 board expands the functionality of your Flipper Zero, allowing you to tackle wireless challenges and explore the digital world with ease. This compact board packs a punch in a portable package. This device requires a Flipper Zero in order to use.
1. Have the switch set to either CC1101 or NRF24 before turning on.
2. Ensure the Flipper Zero is off when plugging the Ultra V3 in.
3. Make sure the size of the SD card you are using is less than or equal to 32GB and that is initialized in Fat32. Also there are brands that may not work with Marauder so please do research on which ones if you plan on using your own.
4. Use this responsibly as this is intended for educational purposes only. Users must take full responsibility for understanding and complying with all applicable laws and regulations.
With a USB-C port for firmware updates and a micro SD card slot for the Marauder application, it offers flexibility and customization options. Whether you're a security researcher or tech enthusiast, the FlipMods Ultra V3 board expands the functionality of your Flipper Zero, allowing you to tackle wireless challenges and explore the digital world with ease. This compact board packs a punch in a portable package. This device requires a Flipper Zero in order to use.
1. Have the switch set to either CC1101 or NRF24 before turning on.
2. Ensure the Flipper Zero is off when plugging the Ultra V3 in.
3. Make sure the size of the SD card you are using is less than or equal to 32GB and that is initialized in Fat32. Also there are brands that may not work with Marauder so please do research on which ones if you plan on using your own.
4. Use this responsibly as this is intended for educational purposes only. Users must take full responsibility for understanding and complying with all applicable laws and regulations.
