Features: Assemble tweezers
Chip extractor
Enclosed in a zippered vinyl case
Nut driver - 1/4 inch
Nut driver - 3/16 inch
Philips screwdriver - #0
Phillips screwdriver - # 1
Slotted screwdriver - 1/8 inch
Slotted screwdriver - 3/16 inch
Three prong parts retriever
Torx screwdriver
Tube to store spare screws and nuts
Features: Dimensions 24 inches (0.61M)x26 inches (0.66)
Highest quality static dissipative material-not the ineffective conductive system
Includes 10ft.(3M) grounding cord
Protect sensitive equipment from static damage
Rubber back-lies flat
Sits under CPU/VDT and keyboard
Top technical specifications-exceeds IBM & US military static control standards
Features: including each of the following:
PHILLIPS No. 00 x 50mm
PHILLIPS No. 1 x 50mm
SLOT 2.0 x 50mm
SLOT 2.4 x 50mm
SLOT 3.0 x 50mm
TORX T15 x 50mm
TORX T20 x 50mm
Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Specifications: Contents:
LAN Cable Tester:
Tests RJ45, UTP, 10 Base-T, Token Ring, RJ-11/RJ-12 USOC and Coaxial BNC Cable
Test Cable for Continuity, Short, Open and Check Cable Type
Separated Remote Units Allow One Person Testing
Reversible Ratchet Handle
10pcs Assorted Bits:
Slotted: 5, 6mm
Philips: PH1, PH2
Pozi: PZ1, PZ2
Star: T10, T15, T20
1pc Adapter Bit for Socket
5pcs Socket Set: 3/16" - 1/4" - 5/16" - 11/32" - 3/8"
Anti-Static/Anti Shock Wrist Band
6pcs Precision Screwdriver
4-1/2" Side Cutter
5" Long Nose Pliers
Flashlight
RJ45 Modular Crimping Tool
8P8C Modular Plug
Protection Cap
Cable Tie
See Through Blow Mold Case
Features: Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables Tests USB and IEEE 1394 cables with optional adapters Built-in Tone Generator for tracing cable with standard Tone Probe Tests the grounding on shielded (screened) cable Verifies cable continuity, opens, shorts, and miswires Tests cable up to
Features: Cut and strip flat cable by one option
Functions for 8P/RJ-45 and 6P/RJ-12, RJ-11
All steel construction for long term durability
Crimps two sizes of plugs
Built-in cutter and stripper
Precision ground
Compact size, easy to handle
Ratchet mechanism to keep tool closed when not in use
Specifications: Includes Accessories:
MicroScanner2 Cable Verifier
main wiremap adapter
remote identifiers #2-7
IntelliTone Pro 200 probe
shielded twisted-pair RJ45 patch cord
RJ11 patch cord
clip-set RJ45 to 8 alligator clip bare wire adapter
F Coax push on patch cord
accessory soft pouch
(2) AA alkaline batteries
(1) 9V alkaline battery
MicroScanner2 Getting Started Guide
MicroScanner2 Owners CD
IntelliTone Pro Getting Started Guide
MicroScanner2 owners CD
IntelliTone Pro Getting Started Guide
IntelliTone Pro owners CD
packaged in a deluxe Fluke Networks carry case
Features: Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet
Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Sup...
WARNING: The products listed on this page and in this category may contain chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.