Built for How Business Buys.
Built for How Business Buys.
The Alphacool Core 1 - Silver is a CPU water block for AMD AM4 and AM5 and for Intel LGA 1700 and LGA 1851. It is made entirely of metal: a nickel-plated copper base sits under a housing milled from brass, here in silver.
Two mounting sets are in the box. The CPU Brackets AMD Set and the four AMD threaded bolts are for AM4 and AM5. The CPU Brackets INTEL Set, the Core Backplate and the four INTEL threaded bolts are for the Intel sockets, and Alphacool's compatibility list gives those as LGA 1700 and LGA 1851. Neither side needs a separately sold bracket.
The mounting system has also been revised: compared to the previous Alphacool models, it requires fewer screws, which simplifies installation. On an Intel board, the backplate (Intel) is pre-assembled with four spacers first. Then the thermal paste is applied to the CPU. After that, the appropriate mounting frame is placed on the CPU cooler and fastened to the spacers with four nuts. On an AMD board, the manual has you remove the two-piece retention frame and use the original backplate of the motherboard, because the Core Backplate is only required for the Intel socket. Its instruction for the threaded bolts on both platforms is to hand tighten only.
The block has two G1/4 threads. Both take the compression fittings for your tube size, which are not in the box. There is no lighting to connect on this version. To run, the block needs a pump and a radiator in the same loop, and the coolant has to stay under the maximum working temperature of 60 °C.