Built for How Business Buys.
Built for How Business Buys.
The Alphacool Eisblock XPX Aurora Edge - Full Brass Chrome Digital RGB is a CPU water block for Intel LGA 1150, 1151, 1200, 1700, 1851, 2011 and 2011-3 and AMD AM3, AM3+, AM4 and AM5. Except for its nickel plated copper cooler bottom the block is made entirely of brass, in chrome with a matte finish. Two digital aRGB LEDs sit behind the logo.
The sockets above are Alphacool's current compatibility list for this block. The box holds an Intel mounting kit and an AMD mounting kit, each described by Alphacool as "backplate, screws, etc.". Its manual, which covers every Eisblock XPX, has mounting chapters for LGA 115x, 1200, 1700/1851 and AM4 / AM5. It also still has one for LGA 2066, a socket the current list leaves out.
On LGA 115x, 1200 and 1700/1851 the manual has you remove the protective film from the backplate and fix it to the back of the mainboard with its tape. Take the protective film off the cooler plate as well, then apply the thermal grease. The screws go through the springs, the washers and the holder, and are tightened hand-tight only, without tools.
The block has two G1/4 threads. Each takes one of the compression fittings for your tube size, which are not in the box. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the digital RGB lighting, the enclosed adapter must be connected to the 3-pin female connector and to a digital RGB controller or a digital RGB-capable mainboard. As one such controller the manual names the Aurora Eiscontrol, which is not included. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. As a CPU water cooler, the block needs a pump and a radiator in the same loop to run.