alphacool nexxxos hpe-30 full copper 360mm radiator (14377)

The Alphacool NexXxoS HPE-30 Full Copper 360mm Radiator is a 360 mm radiator for three 120 mm fans on one side, or six with fans on both sides, and it is 30 mm thick. The next thickness up in the same size is the HPE-45 Full Copper 360mm radiator.

Properties

• Fans: 3x 120 mm one-sided / 6x both-sided
• Size (L x W x H): 391.5 x 124 x 30 mm (+/- 3%)
• Thickness: 30 mm
• Ports: 5x G1/4 (1x fill and drain port included)
• Material: copper fins, pre-chambers and channels, brass threads, stainless steel outer housing
• Fin density: 18 FPI

NexXxoS Full Copper

Alphacool says it has been dominating the market with the NexXxoS Full Copper radiator series for more than a decade, and calls its extensive portfolio of radiator variants unique in the world. It says the same of what it describes as "our manufacturing process, which enables us to manufacture all water-carrying parts and the cooling fins from pure copper". Just like every NexXxoS, the radiator thus achieves what Alphacool claims is the highest thermal conductivity of all radiators on the market. Alphacool credits the series with incomparable performance: the radiators can easily dissipate even extremely high waste heat. By its account they have become indispensable in many areas of the cooling industry.

What the loop needs

Water enters and leaves via two IN or OUT connections with G1/4 thread in the area of the antechambers, which the technical data calls pre-chambers. That is Alphacool's wording under "Connection options & assembly", while its table lists 5x G1/4, the fill/drain port included. A loop uses two of them, so the radiator takes two fittings. On the opposite side there is a fill or vent port that can be used to fill and drain the water circuit. The table names it the fill and drain port, and thread length in every port is 5 mm at most.

The radiator takes 120 mm fans on M3 threads, and the possible fan assignment is three on one side or six on both sides. All screws for mounting in the housing and for mounting the fans are included with the radiator: twelve M3x5 case mounting screws and twelve M3x30 fan screws. Alphacool says additional screws are usually not required.

Technical data radiator

• L x W x H: 391.5 x 124 x 30 mm (+/- 3%)
• Quantity of cooling channels: 14
• Material cooling fins, pre-chambers & channels: copper
• Material threads: brass
• Material outer housing: stainless steel
• Threads: 5x G1/4 (1x fill/drain port included, max. 5 mm thread length)
• Possible fan size: 120 mm
• Possible fan assembly: 3x one-sided / 6x both-sided
• Thread size fan mounting: M3
• Pressure tested: 0.8 Bar
• Maximum working temperature: 60 °C
• Fin density: 18 FPI
• Weight: 793 g
• Color: black

Notes

• Use only clear, transparent water cooling fluids. Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses, which can void the manufacturer's warranty.

In the box

• 1x NexXxoS HPE-30 Full Copper 360mm Radiator, black
• 12x M3x5 case mounting screws
• 12x M3x30 fan screws
• 1x Allen key
• 1x screw plug tool