Alphacool Brass HardTube 13mm OD 90 Degree Tubing (20/40cm), Deep Black (18611)

The Alphacool HardTube 13mm OD 90° Brass 20/40cm - Deep Black (18611) is a pre-bent brass hard tube with a 13 mm outer and 12.2 mm inner diameter and a 90° bend. The long side is 40 cm, the short side 20 cm, and the brass has a black gloss coating. One tube per pack.

Properties

• Outer diameter: 13 mm
• Inner diameter: 12.2 mm
• Long side: 40 cm
• Short side: 20 cm
• Material: Brass, black gloss coating
• Net weight: 150 g

These values are the technical data that Alphacool's page also offers as a data sheet PDF download.

Brass hard tube

Alphacool says its Brass HardTubes let builders give their liquid cooling loop, or any water cooling system, a very special look, and calls that an opportunity for the user. The wall thickness is 0.8 mm. That makes the tubes very strong, but they're still thin enough to be cut and installed without great effort. Alphacool offers the brass tubes in chrome and black, straight and pre-bent, and in various sizes: this is the pre-bent one in black.

Finish

Alphacool describes the chrome plating or painting as extremely durable. Scratches and chipping are only to be expected in the event of strong force.

Cutting

The bend is already made, so only the two sides are shortened to fit. When cutting the pipes, make sure to smooth the cut edges with a fine grit sandpaper or the Alphacool Strong Guy pipe and hose deburrer. Sharp edges can damage the O-rings of fittings.

What a run needs

A tube run takes two fittings, one at each end, from our 13mm OD hard tube fittings.

Notes

• Use only clear, transparent water cooling fluids. Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses, which can void the manufacturer's warranty.

In the box

• 1x Alphacool HardTube 13mm OD 90° Brass 20/40cm - Deep Black