Featured Products See All
CORSAIR RS120 PWM 120mm Fans Triple Pack - Simplified Control - Daisy-Chain 4-Pin PWM ...
$29 .99
- Streamlined Fan Connections: Daisy-chain multiple fans together and control them all through just a single 4-pin PWM connector
- Precise PWM Speeds: Set your fan speeds up to 2,100 RPM while providing up to 72.8 CFM airflow to your system
- CORSAIR AirGuide Technology: Anti-vortex vanes direct airflow at your hottest components for concentrated cooling, pushing air in the direction you need when mounted to a radiator or heatsink
- High Static Pressure: RS fans work well as radiator fans with a static pressure of 4.15mm-H2O to push through obstructions
- Quiet Operation with Magnetic Dome Bearing: CORSAIR's Magnetic Dome bearing minimizes noise and reduces friction for greater longevity
- Quiet Operation with Magnetic Dome Bearing: CORSAIR's Magnetic Dome bearing is a refinement of the renowned magnetic levitation bearing, minimizing noise and reducing friction for greater longevity
- Zero RPM Mode: Supports Zero RPM PWM signals to completely eliminate fan noise at low loads
$29 .99
Phanteks D30-120 DRGB PWM FAN, Premium D-RGB Performance Fan, ARGB/DRGB lighting, ...
Save: $3.99 (14%)
$24 .99
- Regular & Reverse airflow models available: With regular and reverse airflow models available, the D30 fan allows for the perfect configuration without obstructing the fan blade lighting effect.
- Easy and clean fan linking system: Linking multiple fans together reduces cable clutter considerably while the screw cover plates, and bridge connectors make multiple D30 fans work as one clean unit.
- The D-RGB lighting is integrated and visible from all sides of the D30-120 fan. The blades reflect the light coming from the Halos lighting ring inside the frame. Compatible with Digital-RGB equipped motherboards and Phanteks Digital-RGB products.
- 30 mm of performance: On a radiator or behind restrictive mesh/dust filters, the 30 mm thick frame and blades provide plenty of air pressure to keep things cool.
Save: $3.99 (14%)
$24 .99
Phanteks XT Pro Ultra, Mid-Tower Gaming Chassis, 4x M25-140 DRGB Fans Included, High ...
$89 .99
Free Shipping
- Support for the latest rear-side connector mainboards
- Ultra-fine Performance mesh with top mesh dust filter
- Includes 4x M25-140 DRGB Fans included.
- Support for up to 10x 120mm or 6x 140mm and 3x 120mm fan positions
- Dedicated 360 radiator support in the top without restrictions
- Support for the largest graphics cards without compromise
$89 .99
DIYPC Vanguard-F2-Pro Black Dual USB3.0 and Type C Tempered Glass ATX Full Tower ...
Save: $50.00 (31%)
$109 .99
Free Shipping
+ $10 off w/ promo code BBTSF39, limited offer
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboards, support BTF back plug-in MB
- 11 fans capability (4 x 120mm ARGB PWM fans x MB side , 1 x120mm ARGB PWM fan x rear pre-installed) provide great cooling and dynamic cyber gaming atmosphere
- Water Cooling Ready –MB side support 480mm /Top support 360mm radiator
- 2 ways to control ARGB LED fan lighting: either by manual ARGB LED button on bottom; or if your motherboard has 5v addressable connector, this case has ARGB 5V/3 pin header ready to SYNC w/your motherboard to control ARGB lighting. ARGB HUB controller with PWM is included.
- Front/Top/Left and Right side panel tool-free disassembling structure - provide fast installation with no hassle
- Top mounted IO ports - 2x USB 3.0 and 1x Type C for up-to-date high speed data transfer
- Separate HDD /SSD and PSU slots space, good heat dissipation design
- Advanced cable management design - 38mm
- Advanced bottom-mounted power supply design
- Magnetic dust filter at top / bottom - easy clean
- Support up to 180mm CPU cooler
- Support up to 420mm VGA card.
- 1 x accessory kit included
Save: $50.00 (31%)
$109 .99
DIYPC DIY-ATX28-Wood Black USB3.0 /Type C ATX Mid Tower Gaming Computer Case w/ ...
Save: $58.08 (41%)
$81 .91
Free Shipping
+ $5 off w/ promo code BBTSF37, limited offer
- The DIY-ATX28-Wood front panel is crafted with high quality walnut wood. The natural and elegant wood element is perfectly integrated into the modern workspace.
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboards
- Top mounted IO ports - USB 3.0 /Type C for up-to-date high speed data transfer
- 10 fans capability - 3 x 140mm black PWM Silent Fan x front and 1 x 140mm PWM Silent fan x rear (Pre-Installed) provide great cooling and gaming performance
- It supports up to 220mm long full ATX power supply to run the most power hungry system.
- Advanced Cable Management Design – Routing the main cable is easy and quick through a hidden channel. There is a large space behind the motherboard for all cables, making the case a clean and beautiful look.
- Water cooling ready - Top support up to 360mm radiator
- Advanced bottom-mounted power supply design
- Magnetic dust filter at top - easy clean
- Support up to 178mm CPU cooler
- Support up to 380mm VGA card
Save: $58.08 (41%)
$81 .91
Phanteks NV5 MK2, Showcase Mid-Tower Chassis, Rear-Connect MB Support, Integrated ...
$99 .99
Free Shipping
- Create a picture-perfect PC with a seamless glass design.
- Support for the new Rear-Connect Mainboards for a zero-cable build.
- Increased chassis width to support wider GPUs and PCIe cables.
- Premium build quality throughout the strong and reinforced outer frame.
- High Airflow Performance with fine mesh, dust filter and 8x 120mm fan positions.
- Ready for ultimate water-cooling configurations with dual 360 radiator support.
- Integrated D-RGB lighting in the PSU Cover with built-in D-RGB Controller that works out of the box and can sync with the mainboard.
$99 .99
LIAN LI O11D MINI V2 Flow | Compact ATX Mid-Tower Airflow Computer Case | Panoramic View | ...
$99 .99
Free Shipping
+ 10% off w/ promo code BBTSF47, limited offer
- Pre-installed 5 Fans: Includes 5 pre-installed 120mm reverse blade fans positioned at an perfect angle for superb cooling. Optimized Airflow: The slanted bottom design enhances direct cold air intake for improved GPU cooling. Compact Design: Protruded mesh side panel accommodates full-sized ATX power supplies while maintaining a small footprint. Motherboard Compatibility: Supports standard ATX motherboards, specifically optimized for ATX Black Connect motherboards. Enhanced Support: Includes brackets for GPU and 24-pin motherboard cable to reduce strain and ensure a tidy layout.
$99 .99
Antec C8 Curve Wood, Fans not Included, Wooden Front Panel, Super Wide Angle Single ...
$149 .99
Free Shipping
- Curved Glass/Tempered glass/Seamless glass edge/Dual Chamber/Wood Material E-ATX Full Tower Case
- 1 Internal 3.5" Drive Bays
$149 .99
The CORSAIR 3200D RS ARGB is a spacious and fully-loaded mid-tower chassis with 3x RS120 ...
Save: $10.00 (12%)
$71 .99
Free Shipping
- Supports up to a 360mm radiator in the roof for superb CPU cooling.
- Angled PSU shroud fan mount can channel cool air directly at the GPU for better performance.
- Supports the latest reverse-connection motherboards.
- Built-in cable shroud for tidy cable management.
- Easily accessible front I/O panel with a USB Type-C port for fast data transfers.
- Combination drive plate for 1x 3.5" hard drive or 2x 2.5" SSDs.
- Included GPU Anti-sag Stabilization Arm.
- 3x RS120 ARGB fans for brilliant RGB lighting and quiet cooling.
- 400mm GPU clearance without front fans for extra-large GPUs.
- Tempered glass side panel with locking screw for enhanced security.
- Single-connector front panel cable for easy connectivity.
Save: $10.00 (12%)
$71 .99
DIYPC DIY-mATX06-Wood Black USB3.0 /Type C Micro ATX Mid Tower Gaming Computer ...
Save: $33.05 (33%)
$66 .94
Free Shipping
- Front panel is crafted with high quality walnut wood. The natural and elegant wood element is perfectly integrated into the modern workspace.
- Motherboard Compatibility: Supports Micro-ATX, and ITX Motherboard
- Bottom mounted IO ports - USB 3.0 /Type C for up-to-date high speed data transfer
- 7 fans capability - 3 x 120mm black PWM Fan x front and 1 x 120mm black PWM fan x rear (Pre-Installed) provide great cooling and gaming performance
- Water cooling ready - Top support up to 360mm radiator
- Support up to 402mm VGA card
- Support up to 174mm CPU cooler
- Magnetic dust filter at top - easy clean
Save: $33.05 (33%)
$66 .94
Lian Li V100 ATX Mid-Tower PC Case, 4 x 120mm ARGB PWM Fans Pre-Installed, LED RGB Strip, ...
Save: $5.00 (6%)
$74 .99
Free Shipping
On Backorder
- Pre-installed 4 PWM Fans- 120mm ARGB fans. Fan Speed: 1800 RPM - Max. Fan Airflow: 61.47-60.4 CFM - Max. Fan Air Pressure: 2.54-2.17 mm-H2O - Fan Noise Level: 26.5-30.8 dBA - Fan Bearing: Hydraulic bearing Display Platform Elegant ARGB Strip: Integrated 26-LED ARGB strip offers full spectrum color control and synchronization with motherboard software, enhancing both visibility and aesthetics. Toolless Panel Removal Back-connect Motherboard & Large GPU Support: Back-connect ATX and Micro-ATX motherboards, accommodating high-performance graphics cards up to 420mm in length.
Save: $5.00 (6%)
$74 .99
DIYPC IDX8-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming Computer Case w/ ...
Save: $53.05 (44%)
$66 .94
Free Shipping
+ 10% off w/ promo code BBTSF38, limited offer
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX MB
- 10 fans capability (3 x 120mm ARGB reverse blade PWM fan x bottom, 1 x 120mm ARGB PWM fan x rear pre-installed) provide great cooling and gaming performance
- Bottom Mounted IO ports – USB 3.0 /Type C for up-to-date High Speed Data Transfer
- 2 Ways to Control RGB Fan Lighting: Either by Manual RGB LED Button on Top I/O Panel; or SYNC w/your Motherboard to control RGB lighting w/ARGB 5V/3 Pin Header. PWM ARGB Fan Hub Included
- Water Cooling Ready – Top side Support 360mm Radiator
- Advanced Cable Management Design – Routing the main cable is easy and quick through a hidden channel. There is a large space behind the motherboard for all cables, making the case a clean and beautiful look
- Magnetic dust filter at top - easy clean
- Support up to 176mm CPU cooler
- Support up to 420mm VGA card
Save: $53.05 (44%)
$66 .94
Loading Dynamic Data...
