HP Z240 AutoCAD i7-6700K 4 Cores 4Ghz 16GB 250GB NVMe K2200 Win 10

AutoCAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed Faster the better. Recommend 3Ghz or higher. Processor Cores Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. Nvidia Quadro are supported and certified by AutoDesk. This workstation is certified to work with AutoCAD

Processor: Single Intel Core i7-6700K Quad Core 4Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR4-2133U Memory. Supports up to 64GB of total memory, 4 DIMM slots, supporting up to 64GB ECC/non-ECC, DDR4 2133 MT/s or 2400 MT/s speed depending on
the CPU selection.

PCIe Solid State Drive: 250GB NVMe M.2 SSD

Drive Bays: 2 external Half Height 5.25" Bays, 1 external 9.5mm Slim Optical Drive Bay, 2 internal 3.5" Drive Bays, and 1 internal 2.5" Drive Bay

Raid Controller: Integrated SATA Controller, RAID 0,1 supported: 4x 6 Gb/s ports.

Graphics: Nvidia Quadro K2200 4GB GDDR5 Graphic Card, DirectX 11.2 - 1 DVI, 2 DisplayPort - Support up to 3 active monitors (Certified Hardware for AutoCAD 2019)

Operating System: Windows 10 Professional

Software: AutoCAD Software is not included

Power Supply: 400W power supply, 92% efficient

Optical: DVDRW Drive

Networking: Integrated Intel I219LM PCIe GbE Controller (Intel® vPro
with Intel® AMT 11.0)

Slots: 1 PCIe Gen3 x16 slot, 1 PCIe Gen3 x4 slot /x16 connector, 1 PCIe Gen3 x4 slot/x4 connector, 1 PCIe Gen3 x1 slot, 1 PCI slot 32-bit (optional), 1 M.2 slot (PCIe Gen3 x4)

Front Ports: 2 USB 3.0, 1 USB 2.0, 1 USB 2.0 Charging Data Port, 1 Headphone, and 1 Microphone

Rear Ports: 1 DVI-D Single Link and 2 DisplayPort (DP 1.2) outputs from Intel® HD Graphics (available on specific processors only); 4 USB 3.0 ports, 2 USB 2.0 ports, 1 serial port (optional), 1 parallel port (optional), 2 PS/2, RJ-45 (LoM), 1 Audio Line-in, and 1 Audio Line-out, Microphone; 2 IEEE 1394b ports (optional)

Internal Ports: 1 USB 3.0 and 3 USB 2.0 ports available as 2 separate 2x10 (3.0 x1, 2.0 x1) and 2x5 (2.0 x2) header: supports one HP Internal USB 2.0 Port Kit and one USB 3.0 Media Card Reader.

Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.