0.3mm 3D Printer Nozzle Head M6 Thread Replacement for V5 V6 1.75mm Extruder Print, Brass 10pcs

Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.

KEY_TAB

Specification:

Material: Brass

Screw Thread: M6

Nozzle Diameter: 0.3mm

Input Diameter: 1.75mm

Total Dimension: 12.5x7mm / 0.5x0.28KEY_TAB inch (L*D)

KEY_TAB

Package Content:

10 x Brass Nozzle

KEY_TAB

NOTE:KEY_TAB

Small accessories, please keep away from kiddie.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

KEY_TAB

How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please dont touch the old nozzle and heat block to avoid scalding.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.