Built for How Business Buys.
Your Browsing History
Meet Your Seller
Stud Finder Wall Scanner Upgraded 6 in 1 Stud Sensor Wall Detector with LCD Display Center Finding Electronic Wall Detector Finders with Sound Warning for Wood AC Wire Metal Studs Detection
- Item #: 9SIV36AKE32573
- Mfr. Part #: ID-XVET28
- 6 IN 1 SCANNING MODES Towallmark stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud 1/2?: detect wood or metal Stud up to 13mm. Stud 1?: Detect wood or metal Stud up to 25mm. Stud 1 1/2?: Detect wood or metal Stud up to 38mm deep. Metal mode: detect metal up to 80mm magnetic (60mm non-magnetic). AC mode: Detect unshielded AC wires up to 51mm deep
- THE MOST ACCURATE WALL SCANNER Towallmark specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
- LCD SCREEN UPGRADE DESIGN, DISPLAY THE REQUIRED STUD MATERIAL AND THE EXACT POSITION OF THE STUD Digital stud scanner with large LCD display and loud warning.
+
+
Overview
Specs
Reviews
Step 1:Choose the Metal Scan mode to test
Important notice:calibrate it before every scan
Press Power Button to turn on the tool. put it on the wall where you want to detect, and choose the Scan Mode, then press the Scan Button to start calibration, the decreasing bars will disappear and the calibration is completed. Note: It is important to wait for calibration to complete(2-3 seconds)
Step 2: Scan the wall
Then move the stud finder along the wall slowly, if shake or lift the stud finder accidently, the device needs to re-calibrate.
The narrow on the screen together with the beep signal alter, it means you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Important notice:calibrate it before every scan
Press Power Button to turn on the tool. put it on the wall where you want to detect, and choose the Scan Mode, then press the Scan Button to start calibration, the decreasing bars will disappear and the calibration is completed. Note: It is important to wait for calibration to complete(2-3 seconds)
Step 2: Scan the wall
Then move the stud finder along the wall slowly, if shake or lift the stud finder accidently, the device needs to re-calibrate.
The narrow on the screen together with the beep signal alter, it means you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Electronics World Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...