Upgraded 242253002 242102201 Refrigerator Water Inlet Valve Replacement Fit for Frigidaire, Electrolux, Kenmore Refrigerator Parts, Replace 2689640, AP5669874, PS7321353, EAP7321353

Broad Compatibility: This refrigerator water inlet valve is compatible with Frigidaire, Kenmore, Crosley, Electrolux, Gibson, and White Westinghouse refrigerator models, including FGHB2844LPG, FGHB2846LF1, FGHB2846LF2, 25370312212, 25370312213, 25370312214, 25370313212, and others. This upgraded inlet valve is a direct replacement for part numbers: 2692163, 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 7241734301, AP5671757, PS7784018, EPS7784018, K-76150, and WV2702. The triple water valve regulates the water flow from the supply line to both the ice maker and water dispenser in your refrigerator. Crafted from high-quality materials, this 120VDC, 5W valve features 2 1/4-inch and 3 5/16-inch pipe outlets. It is designed to address common issues:
1. No water flow or weak water flow from the refrigerator.
2. Ice maker not producing ice or producing very little ice.
3. Leaks from the valve area. Replacing the inlet valve is simple. When installing, remove the blue clamp used to seal the water pipe. If you do not remove it, installation will not be correct. Keep the clamp for future use when removing or installing a new water pipe.
Troubleshooting:
1.
Check: Confirm if the water inlet valve is blocked (debris may clog the valve).
Solution: Replace with this inlet valve to restore normal water flow to the ice maker.
2.
Check: Verify if the dispenser valve (part of this 3-in-1 valve) fails to open/close properly.
Solution: Install this upgraded valve to fix dispenser water flow issues.
3.
Check: Inspect if the original valve is not sealing tightly (causing water leakage and ice block formation).
Solution: Replace with this valve, which is designed for tight sealing, to stop leaks and prevent solid ice blocks