LMP-C190 Projector Replacement Compatible Lamp with Housing for Sony CX61 CX63 CX80 CX85 CX86 VPL-CX61 VPL-CX63 VPL-CX80 VPL-CX85 VPL-CX86

Rembam Information:
Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.
Specifications:
Part number:LMP-C190
Application:Business/Education/Home/School
Compatible:for Sony CX61 Sony CX63 Sony CX80 Sony CX85 Sony CX86 Sony VPL-CX61 Sony VPL-CX63 Sony VPL-CX80 Sony VPL-CX85 Sony VPL-CX86
Package:
1 bulb with housing
1 Instructions sheet
Installation:
1.Turn off the projector and unplug the power cord.
2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.
3.Loosen the lamp cover screw. Then slide the lamp cover off.
4.Loosen the two screws holding the lamp in place.
5.Hold the lamp as shown and pull it straight out.
6.Gently insert the new lamp. Then tighten its screws.
7.Replace the lamp cover, then tighten its screw.
Notes:
1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.
2.We provide excellent re fund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.