MDS65736906 Washer Door Bellow Gasket Boot Compatible with AP6888038, MDS47123620, PS12725309, MDS65736901, 4957462, (Gray)

The MDS65736906 Washer Door Boot Gasket is compatible with LG Washer Boot Gasket and other models. It serves as a replacement for the following part numbers: MDS47123620, PS12725309, AP6888038, MDS65736901, and 4957462. This washer door bellow features key advantages: A 5-second rebound memory TAPE ensures a tighter door seal. Its double-layer reinforced edge provides significantly enhanced tensile durability. The wavy drainage trough design allows for rapid drainage without water accumulation. For installation of the MDS65736906, follow
these steps: Switch off the power supply, put on gloves, and prepare the new washer door bellow gasket boot along with a screwdriver. Remove the washing machine door, unscrew the fasteners, and then detach the old washer door bellow gasket boot. Warm the new washer door bellow gasket boot with a hair dryer, then press it firmly against the door edge while it remains pliable. Reinstall the screws, mount the door, and run an empty cycle for testing. Please observe these
installation precautions: Anti-cut gloves must be worn throughout the entire process. The use of hot air tools requires dedicated supervision; each heating session must not exceed 120 seconds. Disassembled components should be set aside in the reverse order of removal. It is advisable for two individuals to collaborate on the door body disassembly and reassembly tasks. After installation, allow the unit to stand for 30 minutes until the sealing ring is fully set