Drive Motor 4681EL1008A Clothes Dryer Blower by for LG Ken-More Dryer Replace EAP2400858 4681EL1008B 4681EL1008H 4681EL1008K 4681EL1008P 1330330 (Shaft Length: 2-3/8" and 1-1/4")

The 4681EL1008A Dryer Drive Motor Assembly serves as the primary power source for the drum rotation in a clothes dryer. It enables the drum to rotate continuously via belt or direct drive, allowing garments to be evenly heated and tumbled during the drying cycle for a rapid drying effect. Replacing the 4681EL1008A Dryer Drive Motor Assembly may address the following issues: The dryer will not start. The drum stops turning during the cycle. The drum will not turn. The dryer is noisy.
[NOTE]: The package contains 1 x 4681EL1008A Dryer Drive Motor Assembly. It operates normally at 5.8 Amps, 120V, with a working frequency of 60Hz. This dryer drive motor is engineered for high performance, delivering continuous, robust power output. The internal coil is constructed from premium copper material, providing excellent conductivity and strong magnetic field strength. The motor components are made of high-strength alloy to prevent damage during high-speed rotation, improving durability. Advanced noise reduction technology allows the motor to run more quietly. It is also equipped with overheat and overload protection devices to effectively prevent overheating and overload. The 4681EL1008A Dryer Drive Motor Assembly is compatible with Kenmore LG Dryer models. It replaces the following part numbers: 4681EL1002A, 4681EL1008B, 4681EL1008H, 4681EL1008P, 1330330, AP4438218, PS2400858, EAP2400858. First, disconnect the dryer's power supply. Use a screwdriver to remove the screws on the dryer's top panel, then remove the top panel, control panel, front panel, and drum belt in sequence. You will then see the old motor. Remove the screws from the motor holder, disconnect the wire connections on the motor, and carefully remove the old motor. Place the new motor in its original position, ensuring alignment with the mounting holes. Secure the screws of the motor fixing frame to ensure the motor is firmly installed, then reinstall all previously removed parts. Finally, test the new motor to confirm normal operation