MX3 Wireless in Ear Monitor System 2.4ghz Stereo IEM System Transmitter and bodypack Receiver for Studio, Band Rehearsal, Live Performance, Channel Scan Mode

The MX3 Wireless In-Ear Monitor System is a perfect enhancement for your band's on-stage monitoring arrangement! It features a 100 ft reception range while preserving signal integrity, eliminating feedback, and offering extremely quick response times! Press a single button to toggle between mono and stereo input, delivering smooth frequency response compatibility with any headphones or IEMs. [Use Multiple Channels] Operate up to 6 channels simultaneously with no cross-interference or feedback! With latency below 5 ms and a signal-to-noise ratio reaching up to 107 dB, it provides crystal-clear audio at any volume level! It offers Hi-Fi 24-bit/48 kbps audio quality, a broad 20Hz-20KHz frequency response, and adjustable dynamic range settings.

[Find Your Peak Signal] Simply take it from your pocket, connect it, switch on the power, and you are set to perform! Quickly double-tap both channel buttons to enable channel scan mode. The transmitter's LED will blink during the scan and then stay solid on the optimal wireless channel. First, configure the transmitter's channel, then set the receiver's channel to the same one. [10Hours Battery Life] Powered by a rechargeable battery, the device offers up to 1012 hours of continuous operation per full charge. The system is lightweight, portable, and provides far greater advantages than traditional wedges and past monitoring setups.

[Included in the box] One 2.4 gHz receiver + One 2.4 gHz Transmitter + 6.35 mm audio jack + TYPE C charging cable + XLR to 1/4" adapter