24V 25A 600W Switching Power Supply, 110V AC to DC 24V Converter for LED Strip, Motor Pump, CCTV Camera System, Radio, Car Stereo & 3D Printer

Multi-Safety Protection: DC 24V power supply was strictly tested before leaving the factory. has Overload Protection, over voltage protection, Leakage protection and short circuit protection function.
Wide Application: 110V AC to DC 24V converter for Semiconductor drive, Amplifier, Radios, LED Light Strip, CCTV Camera System, Car Jack, Electronic Devices, Automation Equipment and more 24V Device.

DC 24V 25A 600W Switching Power Supply
110v AC to DC 24v converter assembled high-quality components with high reliability, high-quality chips provide automatic overload/overvoltage/overcurrent/overheat/short circuit/earth leakage multiple safety protection, preventing your device from being damaged.
Technical Parameter
Input: AC 110V/220V (85-145V /185-265V)
Output Voltage: DC 24V (±5%)
Output Current: 25A max
Output Wattage: 600W max
Please change the appropriate voltage on the side of the power supply before use
Frequency range: 50-60Hz
Adjustable output voltage range: ± 5% Nominal voltage
Working Efficiency: >80%
Fix Screw Hole Diameter: 2.5 mm ( 0.1 inch)
Difference range: ± 1%
Operating Temperature,
Working Humidity: -10+60, 20%90%RH
Storage Temperature,
Storage Humidity: -20+85, 10%95%RH
Size: 21.5 × 11.5 ×5cm/ 8.5 × 4.5 ×2 inch
Weight: 0.75 kg
Upgrade 110v AC to DC 24V Converter
24volt power supply adopts a frosted aluminum alloy casing, with many holes and built-in Cooling fan making dissipation more efficient. Built-in dustproof net ensures stable rotation of the fan and prevents the circuit board from burning.
24V SMPS has fixed screw holes, equipped with 4 mounting brackets for convenience for easy installation and fixing on the wall.
Wide Application
DC 24V 600W Power Supply has three sets of output channels, terminal block for ease of wiring and can power for LED Strips, 3D Printer, Radio, CCTV Camera Systems, Audio Amplifier, Motor Pumps, LCD Monito and Industrial Automation Equipment more 24v devices.
Note:
1. SMPS peak power is 25A 600W, avoid overload, recommended for equipment under 21.2A 480W.

2. Please do not use any equipment overload to avoid damage to the equipment.

3. For resistive equipment, the power supply power equipment power x 1.25 times.

4. For motor equipment, the starting current will be much higher than the rated power and the peak power of the SMPS needs to exceed 2 times the motor power.
NOTE: Not suitable for charging Battery, Speed Control Motors.
Efficient Heat Dissipation
Shell with many holes makes better heat dissipation efficient, built in Cooling fan and dustproof net, ensure stable work.
High-Quality PCB Circuit Board
24v power supply unit consists of high-quality PCB circuit board, electronic components and built-in filters for effective anti-interference, good working performance.
Fixing on the Wall
24V SMPS has fixed screw holes, equipped with 4 mounting brackets, can be fixing on the wall.