6 Kohler-Canister Flush Valve Seal Replacements Toilets Equivalent K-GP1059291

CREATE A STRONGER FLUSH: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet!

WORKS ON KOHLERS WITH FLUSH VALVE: Compatible with all Kohler toilets with a canister flush valve. If you have any questions about fit, please ask a question below.
Outer diameter of 3.3"

3 MINUTE INSTALL: Installation instructions for proper use below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 6 for a great value!

Note: This is an aftermarket replacement product by Discount Parts Direct, meeting or exceeding the quality of OEM rings (based on in-house testing)

INSTALLATION INSTRUCTIONS
Step 1: Turn off the water(at toilet's base).
Step 2: Flush the toilet and ensure that the tank is fully empty (flush again if necessary).
Step 3: Un-clip the flush chain.
Step 4: Twist the stem counter-clockwise - this will require some force and you will hear a click.
Step 5: Lift the flushing unit out from the toilet tank.
Step 6: Replace the old seal with your new seal (only one seal per toilet).
Step 7: Put the stem back in and twist clockwise to tighten.
Step 8: Reinstall the flush chain.
Step 9: Turn the water back on.