Seco-Larm MVE-AN1W1-01Q Enforcer Wireless IR Repeater Kit

Extend the range of remote control across IR transmissions with the Seco-Larm Enforcer Wireless IR Repeater Kit. This signal extension kit greatly increases the range of IR signals between compatible devices, allowing you to remotely operate devices such as audio/visual equipment from further distances. The Wireless IR Repeater Kit improves the performance of IR wireless transmissions and reduces RF interference with frequency hopping technology. Multiple types of IR remotes may communicate with the IR Repeater Kit.
Increases the range of wireless IR transmission up to 656ft (200m) line of sight
Frequency hopping technology minimizes RF interference
Compatible with 20~60 kHz IR systems
IR Confirmation LED indicates when IR signals are successfully received
Compact size for easy mounting
Installation DetailsThe IR Repeater Kit's receiver and transmitter both must be plugged into an AC outlet. Place the transmitter facing the device to be controlled and place the receiver facing outward so it may receive signals from your IR remote. A Blue LED will shine when an IR signal is received.
In installations where you want the transmitter and receiver to be hidden, connect the included IR emitter to your receiver and place the emitter in an area to receive signals from your remote. The emitter will forward the signals to the main IR receiver which will send the signals to the IR transmitter and finally to your controlled device.
ContentsIR Transmitter
IR Receiver
Wired IR receiver
Wired IR emitter
(2) 5VDC Power adapters
Mounting tape for wired IR receiver
(2) Mounting tape for wired IR emitter
Manual
Technical DetailsManufacturer Part #: MVE-AN1W1-01Q
UPC: 676544019879
Color: Black
LED Indicators: IR Confirmation
Operating Voltage: 5 VDC
IR Receiver Frequency: ±35° Off Axis
IR Emitter Frequency: 20 to 60 kHz
IR Emitter Angle: ±11° Off Axis
Connector Type:
Power: 1.3mm Coaxial center-pin-positive
Wired IR Receiver: 1/8 in (3.5mm) TRS Mini-plug
Wired IR Emitter: 1/8 in (3.5mm) Mono mini-plug
Maximum Extended Range: 656 ft (200m)
Operating Humidity: 10~90%
Operating Temperature: -4 to 140° F (-20° to 60° C)
Power Supply: 5VDC/500mA
Dimensions:
Transmitter/Receiver: 1-3/4 in x 1-3/4 in x 1-1/4 in (45 x 45 x 31 mm)
Wired IR Receiver: 1-3/16 in x 1/4 in x 3/8 in (20 x 7 x 10 mm)
Wired IR Emitter: 5/8 in x 3/8 in x 3/16 in (16 x 10 x 5 mm)
Cable Length:
Wired IR Receiver: 5 ft (1.5m)
Wired IR Emitter: 10 ft (3m)
RF Frequency: 915MHz
Warranty: 2 Year Limited
Installation DetailsContentsTechnical Details