IO CREST Internal 5 Port Non-RAID SATA III 6GB/s M.2 B+M Key Adapter Card for Desktop PC Support SSD and HDD. JMB585 Chipset

JMB585 chipset

Using the JMB585 chipset, the adapter can provide M.2 (PCIe Gen3 x2 bandwidth) to 5 Port SATA 6Gb / s card solution. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

M.2 modules are neither hot-swappable nor hot-pluggable. Performing hot-swap or hot-plug may damage the modules.

5 Swappable SATA ports

For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

Features:

2-Lane M.2 PCI-Express 3.0 interface (B & M Key).

Complies with PCI Express Base Specification Revision 3.1a.

Supports PCIe link layer power saving mode.

Supports command-based and FIS-based for Port Multiplier.

Complies with SATA Specification Revision 3.2.

Supports 5 SATA port.

Supports AHCI mode and IDE programming interface.

Supports Native Command Queue (NCQ).

Supports SATA link power saving mode (partial and slumber)

Supports SATA plug-in detection capable.

Supports drive power control and staggered spin-up.

Supports SATA Partial / Slumber power management state.

Supports Port Multiplier.

System Requirements:

Windows 7 (X86/X64)

Windows 8/8.x / 10 (X86/X64) (Windows in-box driver)

Linux-base OS

Note: Does not support RAID on Port Multiplier.

Package Contents:

1 x M.2(PCIe3.0) to SATA 6G Adapter

1 x User Manual

3 x SATA Cable

1 x Driver CD