for Raspberry Pi HQ Camera, 12.3MP IMX477 High Sensitivity CMOS Pi 5 Camera, Comes with C-CS Adapter and Tripod Mount for RPI 4 Model B/3/3B+/Zero 2W

Product description The HQ camera is a 12.3 -megapixel IMX477 sensor with a 7.9 mm diagonal image size, back-illuminated sensor architecture, adjustable back focus, and C and CS interface lens support. The IMX477 Raspberry Pi Camera offers higher sensitivity than the existing camera module v2, with a pixel size of 1.55 µm × 1.55 µm, twice the pixel area of the IMX219 on the camera module V2, which improves low-light performance.
Note: This is an IMX477 camera designed by Arducam, please use the libcamera stack. You need to modify the config. txt file and add configuration lines according to the camera type before use. For Raspberry Pi Bookworm users running on Pi 5, please
do the following: sudo nano /boot/firmware/config.
txt #Find the line: camera_auto_detect=1, update
it to: camera_auto_detect=0
#Find the line: [all], add the following item under it: dtoverlay=imx477 #Save and reboot. If you want to enable the camera kit on the cam0 port of Pi5, please replace the dtoverlay=imx477 with dtoverlay=imx477, cam0 For Raspberry Pi Bookworm/Bullseye users running on Pi 4 Pi 0 ~ 3, and Bullseye OS on Pi0-Pi3 please check the manual that comes with the parcel for further information.
Note: After configuration, reboot the device is a necessary step. This camera model supports Tripod Mount (not included in the package), so you can take photos more conveniently. No matter where you want to shoot, the tripod mount can help you mount the camera more securely and more stable. Search B0897QD6C2