Yaregelun To avoid excessive current when locked-rotor, keep
enough power headroom suggestions: 12V
working condition: 6pc 540 or 6pc 550 or 4pc 775 or 4pc 795 or 4pc 895 or single 997 24V working condition: 4pc 775 or 4pc 795 or 2pc 895 or 2pc 997 The switch UBEC 5V 3A can drive two 25kg servos. It is not a 7805 linear regulator, so two ESCs cannot be used to power the receiver at the same time. (When multiple ESCs are working simultaneously, only one can supply power to the receiver. Use a toothpick to pick out the 5V red wire of the head of the other ESCs, then fold it up and wrap it with tape. There is no need to cut the wire. )
Item name: 200A 3S-6S
Dual Way Brushed ESC Size: 7x8x 2.5 cm
Working current: 12V-26V(3S-6S)
Controller input pulse width: 0.8 ms- 2.2 ms, 1.5 ms is the mid-point There are 48pcs large power mos tube(same power on forward/reverse rotate), 12pcs large power mos tube on the
H bridge current: 200A
Rated power: 2000W Only forward and reverse rotation mode, no brake mode With out of control protection
Attention: This item is not waterproofed. If one receiver uses two ESCs at the same time, you need to cut off the red positive wire in the middle of the BEC signal line of one ESC. One ESC can supply power to the receiver. If two ESCs supply power to the receiver at the same time, it burn.
Color: As
Shown Material: plastic
Package Contents: 1 x ESC Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.