Dual Gigabit Ethernet Base Board for Raspberry Pi Compute Module 5 Lite/eMMC Series Module, Support Dual RJ45 Network Port Supply and Type-C 5V 5A DC Power Supply, with USB3.2 Gen1 Port, etc.

Overview As a MINI board for Raspberry Pi Compute Module 5, CM5-DUAL-ETH-MINI is a baseboard that can be used with the Raspberry Pi Compute Module 5, supporting dual network port supply and Type-C 5V 5A DC power supply. It comes with 1 USB 3.2 Gen1 port, making it convenient for users.

Specifications

CM5 socket--suitable for all variants of Compute Module 5 Networking--Dual Gigabit Ethernet RJ45 connectors USB--USB 3.0 port PIN HEADER--40PIN GPIO header Storage--TF card socket for Compute Module 5 Lite (without eMMC) variants Fan header--4-wire SH 1.0 port, allows speed adjustment and measurement, 5V Power input--5V, Type-C interface
Dimensions--the base board: 55.0 × 68.0 mm Precautions 1. Do not plug or unplug any device other than USB and network port when the device is powered on 2. Type C is used as a USB SLAVE interface for burning images, and cannot be used as an OTG interface, it cannot provide power to external devices 3. Onboard default 1 USB 3.2 Gen1 port 4. The onboard BOOT button, you can press BOOT button before powering on, and connect to the computer through Type-C to let the device enter the flashing mode 5. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized 6. The USB 3.0 port has a maximum current output of 2A Package Content CM5-DUAL-ETH-MINI x1
NOTE: Online Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!