Product description
Description: The wireless transceiver module can set up your wireless communication system. You can add it with your own MCU/ARM/PIC/AVR/STM32 system, this module also come with power amplifier and SMA antenna, which make the wireless communication up to 800+ meters with No Barrier.
Note: 1. The module has 5V tolerant inputs, the power supply must be 3.3V, but the data and control inputs can be 5V(I/O can be 5V). When the module used with RC planes/cars, please
note:
1. If only a single reception and a single transmission are used, then a code value is required.
2. Please pay attention to environmental interference during use.
NRF24L01+PA+LNA Wireless Transceiver Module Specification: PA
Gain: 20dB
LNA Gain: 10dB
Range: 800+ meters line of sight
Frequence: 2.4GH z~ 2.5GH z
Multi-frequency: 125 frequency
Operating voltage: 3 ~ 3.6V MaxRecommended 3.3V Max Transmit Operating Current 115mA Max Receiving Operating Curent 45mA Pin Quantity 8Pin On-board AMS1117- 3.3 chip
NRF24L01+ Breakout Adapter: Compatible with Arduino and for Raspberry Pi Pin Quantity8Pin On-board AMS1117- 3.3 chip. Voltage Regulator Input Voltage (connected to
VCC): 4.8V ~ 12V Small power on SMD LED indicator