HOOCCC Dual M.2 NVMe PCIe 4.0 x16 Splitter Card PCIe Bifurcation x8 x4 x4 Adapter with Full Height and Low Profile Brackets

Overview

Upgrade your desktop storage with this high-performance Dual M.2 NVMe PCIe 4.0 x16 Adapter Card. Designed for enthusiasts, gamers, and professionals, this card allows you to install two M.2 NVMe SSDs (2230/2242/2260/2280) into a single PCIe x16 slot, maximizing your systems storage potential without sacrificing speed.

Key Features

1. Dual SSD Support: Features front and back M.2 slots to accommodate two NVMe drives simultaneously.
2. PCIe 4.0 Ready: Supports transfer speeds up to 7,500MB/s (performance varies based on SSD and system configuration). Backward compatible with PCIe 3.0.
3. x8/x4/x4 Bifurcation: Utilizes PCIe bifurcation technology to allocate x8 bandwidth to the primary slot and x4 to the secondary slot, ensuring optimal performance for both drives.
4. Universal Fit: Includes both full-height and low-profile brackets, making it suitable for standard ATX towers, small form factor (SFF), and HTPC builds.
5. Stable Design: The 4-layer PCB and open-frame layout enhance signal integrity and provide passive cooling to prevent thermal throttling during heavy workloads.

Important Note: BIOS Requirement

This adapter card does not contain a hardware PCIe switch. It requires your motherboard to support PCIe Bifurcation. You must enter your BIOS/UEFI settings and set the PCIe slot to x8/x4/x4 mode for the system to recognize both SSDs. If bifurcation is not enabled, only the primary SSD will be detected. Please check your motherboard manual for compatibility before purchasing.

Package Contents

1. 1 x Dual M.2 NVMe PCIe Adapter Card
2. 1 x Low-Profile Bracket
3. 1 x Full-Height Bracket (pre-installed)
4. 1 x Screwdriver
5. 2 x M.2 Screws