All CategoriesBuilt for How Business Buys.
All CategoriesMeet Your Seller
PCIe 5.0 x4 to E1.S / E3.S SSD Adapter Card, Support EDSFF SFF-TA-1002 Hard Drive, PCIe 5.0/4.0/3.0 Back Compatible
- Item #: 9SIVUZMM9U7970
- Mfr. Part #: DWO/SBN/PCIE5x4-E1E3R27C
- E1.S / E3.S EDSFF Support Compatible with all E1.S and E3.S NVMe SSDs following the SFF-TA-1002 connector standard. Not SSD thickness limited.
- PCIe 5.0 x4 Bandwidth Fully supports PCIe Gen 5.0 x4 (32 GT/s) to unlock over 14,000 MB/s read speeds; backward compatible with PCIe 4.0/3.0 hosts. *Note: Please check if personal CPU and Motherboard support PCIe 5.0.
- Simple Installation Plug and play, no driver required. Mount the E1.S/E3.S NVMe SSD drive directly onto the interface with specific screws, and then insert into any PCIe x4/x8/x16 slot. Hot Swap is not supported.
- Optimized Airflow Channel The PCB features a wide cutout under the drive bay to eliminate stagnant hot air and improve natural convection, essential for highpower PCIe 5.0 SSDs.
+
+
Overview
Specs
Reviews
The PCB is intentionally left open around the drive area with a large ventilation cutoutno fans, no shrouds. This allows chassis airflow to directly cool the SSD, keeping thermal throttling at bay during sustained workloads.
Whether you are prototyping nextgen storage or building a highperformance workstation, this adapter gives you a clean, nocompromise connection for E1.S and E3.S SSDs.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by DAOWO Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...