IHDAPP 8K@60Hz USB 3.0 Displayport KVM Switch 2 Monitors 2 Computers, DP 1.4 Dual Monitor KVM Switch with Audio Microphone Output and 3 USB 3.0 Ports, Wired Remote and 2 USB Cables Included

8K@60Hz Displayport KVM Switch for 2 monitors 2 computers Share 2 monitors and 3 USB 3.0 devices


Features:

1. KVM Switch Displayport 2 port allows 2 computers/laptops share one set of keyboard, mouse, and 2 monitors (DisplayPort+ DisplayPort).

2. Dual monitors output support up to 8K@60Hz/4K@120Hz, Ultra HD, HDR 10, Dolby vision, 3D effect.

3. Support DP 1.4, transfer rates up to 32.4G bps, backwards compatible with DP 1.2.

4. 2
Switching modes: Button switch and wired remote.

5. With extra 3 USB 3.0 ports and independent audio microphone output.

6. Plug and play, compatible with Windows/Vista/XP and Mac Os, Linux and Unix

7. The ports that need to plug in DisplayPort/USB cables are all hidden behind the 2 monitor KVM switch, so the desktop doesn't get cluttered, you can enjoy the clean workspace.


Installation steps:
1. Insert the power adapter into the KVM;

2. Plug the 2*Displayport cable into the KVM switch and monitor; (Output)

3. Plug the Displayport cable and USB cable into the KVM switch and your computer/laptop (DP cables are not included) (Input)

Please check whether DP IN 1A, DP IN 1B, and USB IN 1 are corresponding, and whether DP IN 2A, DP IN 2B, and USB IN 2 are corresponding. Mixed insertion is not supported.

DP IN 1A + DP IN 1B + USB IN 1=PC1

DP IN 2A + DP IN 2B + USB IN 2=PC2

4. Insert the mouse and keyboard into the KVM switch

5. If needed, you can connect a microphone and audio port

Note:

1. Most of the reasons why only one video output works is because of an incorrect connection. Please make sure each computer has 2 DP cables connected to the KVM.

2. If the KVM switch does not work, you can turn off the switch on the panel and turn it on again after 2-3 seconds, and it will return to normal.