RP2350 1.8inch Touch AMOLED Display Development Board 368×448 Pixels 16.7M Color Display,Embedded with SH8601 Display Driver and FT3168 Capacitive Touch Chip

Introduction RP2350-Touch-AMOLED- 1.8 is a high-performance and highly integrated MCU board designed by. Despite its compact size, it integrates a 1.8 inch capacitive HD AMOLED, a RTC, a six-axis sensor (three-axis accelerometer and three-axis gyroscope), a TF card slot and other peripherals on board for easy development and embedding into the product. Features RP2350-Touch-AMOLED- 1.8 is a high-performance, highly integrated MCU board designed by. It features a compact size with an onboard 1.8 inch AMOLED capacitive touch display, power management chip, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low-power audio codec chip and so on, making it easy to develop and integrate into products quickly.

RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 520KB of SRAM, and 16MB onboard Flash memory Type-C connector for easier use Onboard 1.8 inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively Lithium battery recharge/discharge header, suitable for mobile applications USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB Adapting 5 × multi-function GPIO pins 2 × I2C, 1 × UART, 1 × 12-bit ADC, 5 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip 12 × Programmable I/O (PIO) state machines for custom peripheral support Package Content RP2350-Touch-AMOLED- 1.8 x1