Flexible Spring Steel Magnetic Build Plate for Resin 3D Printer - SLA 3D Printer Parts/Accessories Replacement Build Platform Bed Compatible with Anycubic Photon Mono 2 160x95mm

Compatible With One
3D Printer Model: This spring steel build plate bed measures 160x95mm and is designed to be only compatible with Anycubic Photon Mono 2 SLA resin 3d printers. Please confirm your 3D printer model and platform size before ordering.
Flexible Spring Steel Build Plate: The build platform is made of spring steel strong and durable not easy to deform good flatness and durability providing a stable and reliable platform for your 3D printing needs. Easy to bend and clean good corrosion resistance to prevent rust. The surface of the spring steel is specially brushed for stronger adsorption which better adsorbs the model and ensures perfect printing.
Build Platform Note: The thickness of this build plate is 2.7 mm the print height will be reduced by 2.7 mm. you can print a 2.7 mm sp to compensate for the difference to prevent the Z-axis from going back to zero. Meanwhile after installing the magnetic print platform bed you need to re-level the 3D printer to get excellent printing results.
Easy To Take Mold: The magnetic printing platform is made of high quality stainless steel material with good flexibility. After bending and dismantling the model it can be quickly restored to its original shape and reused. If the print model is still stuck to the build plate gently bend the plate to remove it. There is no need to scratch pry or damage the print! The prints are easily removed without causing any scratches or damage.
Simple Installation: Please clean the build plate with alcohol and make sure the surface is free of any resin or dust. The build plate must be clean and dry. You also need to paste and compact the magnetic base on the build plate to make sure there are no air bubbles otherwise the magnetic base will fall off. Please wait 48 hours after installation before printing.
Tip: Use a hair dryer to blow the magnetic base evenly with hot air for 5-10 minutes after installation to increase adhesion.