ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 4 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light

Localized Strengthening, Uniform CuringThe " Innovative Flexicure Gooseneck Light Design" increases the energy value by 30, 000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model
Larger Wash&Cure SizeAnycubic Wash & Cure 3s maximum cleaning volume is up to 165*100*180mm, The total volume of the cleaning bucket has been expanded to 4L. The curing size is up to 160*180 mm, to accommodate larger and more models for single post-processing session
Detergent SavingAnycubic wash and cure 3 machine' s double-layer PP material cleaning basket designed with two heights at 3.93 ' ' and 6.5, to flexibly accommodate print platforms from 5.9 " to 7.3 ". The amount of IPA used can be adjusted according to the heights of the model to achieve savings
Wide CompatibilityEnlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 4/2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3 ' ' and below available on the market
Simple Operation, Quiet and EfficientOne click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, 1 to 30 minutes adjustment. Besides, The decibel when the machine is running does not exceed 65db and will not disturb normal life and work