All CategoriesBuilt for How Business Buys.
All CategoriesMeet Your Seller
3D Printer Adhesive Glue for Cryogrip Pro Frostbite/Glacier Plate | For PLA/PETG/ABS/TPU/PET/ASA/PAHT-CF/PA12-CF etc. Filament, Stronger Adhesion No Residue (60ml) Comparable to Bambu-Lab Glue
Limited time offer, ends 10/10 By TERRA HAVEN
- Item #: 9SIVTD8M4E4706
- Mfr. Part #: C6T1812-XMTT089
- Usage1. Application: To apply the glue, press down on the applicator head and distribute the glue evenly across the print area. 2. Removal: Once the temperature decreases, the adhesive will become less sticky, allowing for easy removal of the print. 3. Maintenance: After printing, clean both the build plate and the bottom of the model using water, alcohol, or soap; Higher Temperatures, Stronger AdhesionPerformance varies according to the temperature, with noticeable changes occurring every 10°C. Say goodbye to models falling off the plate and warped prints, even during high speed printing; Broad CompatibilityWorks seamlessly with a wide variety of materials-from advanced engineering filaments like PET-CF, PAHT-CF, and PA12-CF to more common options like PLA, ABS, PETG, TPU, ASA...; TipsFor optimal results, avoid applying multiple layers of glue. Do not squeeze the bottle too hard as this can cause excessive glue flow. If adhesion is insufficient with certain filaments, try slightly increasing the temperature of the heated bed
+
+
Overview
Specs
Reviews
Usage1.
Application: To apply the glue, press down on the applicator head and distribute the glue evenly across the print area. 2.
Removal: Once the temperature decreases, the adhesive will become less sticky, allowing for easy removal of the print. 3.
Maintenance: After printing, clean both the build plate and the bottom of the model using water, alcohol, or soap; Higher Temperatures, Stronger AdhesionPerformance varies according to the temperature, with noticeable changes occurring every 10°C. Say goodbye to models falling off the plate and warped prints, even during high speed printing; Broad CompatibilityWorks seamlessly with a wide variety of materials-from advanced engineering filaments like PET-CF, PAHT-CF, and PA12-CF to more common options like PLA, ABS, PETG, TPU, ASA...; TipsFor optimal results, avoid applying multiple layers of glue. Do not squeeze the bottle too hard as this can cause excessive glue flow. If adhesion is insufficient with certain filaments, try slightly increasing the temperature of the heated bed
Application: To apply the glue, press down on the applicator head and distribute the glue evenly across the print area. 2.
Removal: Once the temperature decreases, the adhesive will become less sticky, allowing for easy removal of the print. 3.
Maintenance: After printing, clean both the build plate and the bottom of the model using water, alcohol, or soap; Higher Temperatures, Stronger AdhesionPerformance varies according to the temperature, with noticeable changes occurring every 10°C. Say goodbye to models falling off the plate and warped prints, even during high speed printing; Broad CompatibilityWorks seamlessly with a wide variety of materials-from advanced engineering filaments like PET-CF, PAHT-CF, and PA12-CF to more common options like PLA, ABS, PETG, TPU, ASA...; TipsFor optimal results, avoid applying multiple layers of glue. Do not squeeze the bottle too hard as this can cause excessive glue flow. If adhesion is insufficient with certain filaments, try slightly increasing the temperature of the heated bed
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 60 days
- This item is covered by TERRA HAVEN Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...