All CategoriesBuilt for How Business Buys.
All CategoriesMeet Your Seller
Arducam Day and Night Vision IMX477 HQ Camera for Jetson Orin NX, 12MP Automatic IR-Cut Switching for All-Day Image
- Item #: 9SIVV5UM8U1860
- An All-day Vision IMX477: Built-in a motorized IR-CUT Filter, switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night).
- High Quality Imaging: Keep the high image quality of 1/2.3 12.3 Megapixel IMX477 sensor, max. still resolution 4056(H) x 3040(V). Field of View: 65° (H)
- Less Hassle: No more wasting time looking for the CS lens and camera case. A 1/2.3 6mm focal length CS lens is included; Hole Pitch: Compatible with 29mm, 30mm, 34mm, compatible with standard industrial camera enclosure.
- Applications: Automatic Switching IR-CUT filter and high resolution make it perform better in monitoring Octoprint 3D Printer, Day & night vision security camera system, motion detection, wildlife photography and other machine vision projects.
- NOTE: 1. It compatible with Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Pi 3/3B+/4) 2. This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
+
+
Overview
Specs
Reviews
This Arducam module uses the same 12MP IMX477 image sensor as the RPi High Quality Camera, but offers a mechanical IR cut-off filter switched automatically based on light condition. The official RPi HQ camera is not sensitive to infrared, and there wont be a NoIR version. On the contrary, this Arducam camera module not only offers sensitivity to infrared but also keeps the natural feeling during daylight. Its fully compatible with Jetson Board with a camera connector.
SPECIFICATION
Camera
- Sensor: IMX477
- Optical Format: 1/2.3 (diagonal 7.857mm)
- Resolution: 4056(H) x 3040(V) 12.3MP
- Pixel Size: 1.55um x 1.55um
- IR Sensitivity: Switchable IR-CUT filter
- Interface: 4-lane MIPI CSI-2
- Lens Mount: CS-Mount
- Frame Rate: (depends on the target platform, maximum fps limit might apply)
Full resolution@60fps(normal), 4K2K@60fps, 1080p@240fps
Full resolution@40fps (12bit normal)
Full resolution@30fps (DOL-HDR, 2 frames)
Lens
- Format: 1/2.3 inch
- Focal Length: 6mm
- Aperture (F): Max. F1.2
- Field of View (FOV): 65° (H)
- Mount: CS-Mount
- Back Focal Length: 7.53mm
- MOD: 0.2m
- Dimension: 30×31mm
- Weight: 53g
Camera board
- Board Size: 38mm×38mm
- Hole Pitch: Compatible with 29mm, 30mm, 34mm
KERNEL CAMERA DRIVER USED
This camera relies on kernel drivers to work one kernel version, one camera driver.
- Versions earlier than JetPack 4.3 (L4T 32.3.1) are not supported.
- Up or downgrading your OS leads to a kernel bump, and youll need to re-install a matching driver.
- Future JetPack/kernel updates require future drivers. When that happens, please allow us some time to process and if you dont see it released in time, kindly remind US.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 60 days
- This item is covered by Temonick shop Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...