4 Pin IDE Molex Power Splitter Extension Cable (40cm/15.7in) - 1 to 4 D-Type Male to Female Adapter for PC Case Fans, HDD, Optical Drives, ATX PSU Power Expansion

Product Description Need more 4 Pin IDE Molex power ports? Our 40cm splitter cable turns 1 male Molex (D-type) into 4 female connectors perfect for powering PC case fans, old HDDs, optical drives or other Molex devices. 18AWG tinned copper wires deliver stable 12V/5V power, while the flexible 15.7in cable lets you route neatly in mid/full-tower cases. Durable locking connectors prevent loose fits, and its plug-and-play (no tools needed) with all standard ATX PSUs. Ideal for PC builders or retro setups expand your power easily!

Product Name: IDE Molex Power Extension Splitter Cable - 1-to-4 D-Type Male to Female Adapter

Product Dimensions: 40 x 2.6 x 1.8 cm / 15.7 x 1.02 x 0.71 in

Connector 1: IDE Molex 4-Pin Female Connector 2: IDE Molex 4-Pin Male

Colour: Black

Safety & Usage Tips

1.Power Load Restriction

Do not exceed the maximum power capacity of your ATX power supplys 4 Pin Molex port (typically ~150W per port). Avoid connecting multiple high-power devices (e.g., high-RPM fans, old HDD arrays) to a single splitter to prevent overheating, voltage drops, or device damage.

2.Interface Compatibility Check

This cable is only compatible with large 4 Pin IDE Molex (D-type) ports. It does NOT fit small 4 Pin PWM fan connectors, SATA power ports, or other non-Molex interfaces. Double-check your PSU and device ports before installation to avoid connection failures.

3.Proper Cable Routing

Route the cable away from sharp edges of your PC case, GPU brackets, or hard drive bays to prevent wire insulation damage. Use cable ties to secure the cable for a tidy layoutthis also improves case airflow and reduces the risk of accidental disconnection.

4.Safe Installation & Handling

Always disconnect your power supply from the wall outlet before installing or removing the cable to avoid short circuits or electric shock. Do not cut, splice, or modify the cable in any wayunauthorized modifications will void product safety and may cause fire hazards.

5.Retro Device Compatibility Note

When powering legacy HDDs or optical drives, confirm that the devices voltage requirements (12V/5V) match the standard output of your PSUs Molex port. This cable is designed for standard Molex-powered devices and does not support voltage conversion.

Package Contents: 1 x IDE Molex Power Extension Splitter Cable - 1-to-4 D-Type Male to Female Adapter