PH4123 M.2 M-Key to PCIe 4.0 x4 Extension Cable 64Gbps, Compatible with PCIe 4.0/3.0/2.0, FPC Flexible Ribbon, for NVMe SSD or External PCIe Devices (PH4123B-20cm)

AoQhir PH4123 M. 2 M-Key to PCIe 4.0 x4 Extension Cable 64Gbps, Compatible with PCIe 4.0 / 3.0 / 2.0, FPC Flexible Ribbon, for NVMe SSD or External PCIe Devices Product Description Relocate Your PCIe Devices Freely The PH4123 M. 2 to PCIe 4.0 x4 Extension Cable gives you the freedom to place your NVMe SSD or other PCIe hardware exactly where you want it away from GPU heat, around tight case corners, or even outside the chassis for testing or external mounting. Performance You Can Trust Unlike cheap risers that lose signal integrity over distance, this cable maintains full PCIe 4.0 x4 (64Gbps) speeds.

Independent read/write tests confirm no performance difference compared to plugging your device directly into the M. 2 slot. No lag, no throttling just pure bandwidth. Built for Tough Environments The cable core uses an advanced FPC flexible circuit board with flame-retardant properties. It resists the high temperatures commonly found inside gaming PCs, workstations, and servers, so you wont have to worry about embrittlement or cracks over time. At only 0.3 mm thick, it routes easily through tight cable management spaces. Two Versions for
Different Layouts: PH4123A- (Straight) 55mm width. Best for straightforward connections where the M. 2 slot and device align directly. PH4123B- (L-Shaped) 30mm width. The L-shaped connector helps route around obstacles or fit flush against a chassis wall. Easy Monitoring A convenient onboard power/connection LED stays solid when everything is working correctly. No more guessing whether your riser cable is seated properly.
Compatibility Notes: Host requires an M. 2 M-Key slot (PCIe, not SATA). Supports M. 2 devices up to 2280 length. Works with NVMe SSDs, external GPU adapters (if combined with an M. 2 to PCIe slot adapter), and other PCIe x1/x4/x8/x16 devices (at x4 link).