Hot and Cold Laminator Cold lamination and hot lamination are categorized based on different film coating consumables. This laminating machine accommodates hot laminating consumables such as BOPP and PET hot melt adhesive pre-coated films, and also supports a broad variety of cold laminating films, self-adhesive stickers, and self-adhesive sheets. Single and
Double Sided Lamination Type: A3+ 13 inch / 33 cm. It can laminate on one side, or apply film to both sides simultaneously using hot laminating. When film is loaded in both the upper and lower positions, double-sided lamination is finished in a single pass. During operation, the rollers run continuously. There is no direct friction between the rubber roller shaft and the shaft sleeve, leading to very little wear and prolonged operational durability. HD Display and Simple Control Panel The laminator's temperature, speed, and mode are shown on a digital display, which stays clearly visible under natural soft light, direct sunlight, or at night. The operation panel is straightforward yet effective, making it very easy to use. Intelligent Error Correction The system evaluates conditions automatically. If it identifies and rejects unreasonable instructions, it will assume control of the machine and switch to full-automatic mode. This intelligent control assists in preventing the machine from overheating. Integrated Flip Feed Table This double-sided thermal laminator features a connected paper feeder that remains attached to the main unit, reducing the chance of misplacement. When installing or changing consumables, the platform can slide and flip over along its track without requiring detachment