2X 6dBi Dual Band WiFi Antenna RP-TNC Male 2.4GHz/5GHz Omni-Directional for Linksys Router WRT54G WRT54GL WRT54GS WAP54G, Cisco Aironet, Trimble Total Station, Wireless Access Point, Industrial IoT

Are you tired of weak WiFi signals, dropped connections, and limited range on your Linksys router or Cisco access point? The 2-Pack 6dBi Dual Band RP-TNC Antenna Set is engineered to dramatically improve your wireless coverage. Upgrade from standard 2-3dBi stock antennas to 6dBi and experience extended range, stronger signal through walls, and more reliable connections throughout your home or office.

Linksys and Cisco use RP-TNC (Reverse Polarity TNC) as the standard antenna connector for most of their wireless products. Unlike RP-SMA connectors commonly found on other brands, RP-TNC is thicker and features a more robust threaded design with a pinless male connector. Our antennas are designed to be a direct replacement for your original equipmentno adapters, no modifications, just plug and play.

This antenna set works with virtually any device equipped with RP-TNC female ports:

Linksys Wireless Routers & Access Points:

1. WRT54G, WRT54GL, WRT54GS, WRT54G-TM
2. WAP11, WAP54G, WRT160NL
3. WRT1900AC, WRT1200AC, WRT3200ACM
4. E series routers (E1200, E2500, E3200, etc.)
5. BEFW11S4, BEFW11P1

Cisco Aironet Access Points:

1. Aironet 340, 350, 1200, 1310 series
2. Aironet 2700, 2800, 3700 series
3. AIR-ANT2524DW-R, AIR-ANT5135DB-R, AIR-ANT5135DW-R
4. AIR-ANT5160V-R, AIR-ANT2566P4W-R

Trimble & Surveying Equipment:

1. Trimble Total Stations: S3, S5, S6, S7, S8, VX, RTS series
2. Data Collectors: TSC2, TSC3, Spectra Precision Ranger 3
3. Trimble Robotic Total Stations

Other Compatible Brands:

1. Proxim Stratum MP, Harmony AP
2. Tranzeo, Wi-LAN, EnGenius access points
3. Industrial access points, gateways, and IoT devices with RP-TNC ports

Step 1: Locate Antenna Ports Find the external antenna ports on your Linksys router, Cisco access point, or Trimble device. Most Linksys routers have 2 antenna connectors.

Step 2: Remove Old Antennas Carefully unscrew your existing antennas by turning them counterclockwise. Most are hand-tightenedno tools needed.

Step 3: Attach New AntennasScrew the RP-TNC male connector onto the RP-TNC female port. Hand-tighten onlydo not use tools or overtighten to avoid damaging the connector.

Step 4: Position for Optimal Signal Adjust the tilt-and-swivel hinge to angle antennas as needed:

1. Routers: Position antennas vertically for maximum horizontal coverage
2. Multi-story buildings: Angle antennas at 45° to improve vertical coverage
3. Metal obstructions: Position antennas away from metal surfaces

Step 5: Test & EnjoyPower on your device and enjoy enhanced wireless coverage.

1. Compatibility Check: Ensure your device has RP-TNC female ports (internal threads with a center hole). This is the standard on most Linksys/Cisco products.
2. Antenna Orientation: For omnidirectional antennas, vertical orientation generally provides the best horizontal coverage.
3. Signal Environment: Actual range improvement depends on environmental factors including walls, interference from other electronics, and the transmit power of your device.
4. Not for RP-SMA Devices: If your device has RP-SMA connectors (common on ASUS, TP-Link, Netgear), this antenna will not fit without an adapter.

What's Included:

1. 2x 6dBi Dual Band RP-TNC WiFi Antennas (2.4GHz/5GHz)

Quality You Can Trust:

1. 6dBi High Gain 2-3x Stronger Than Stock Antennas
2. Dual Band Support 2.4GHz & 5GHz for Maximum Compatibility
3. RP-TNC Male Connector Exact Fit for Linksys & Cisco
4. Omni-Directional 360° Coverage Signals from All Directions
5. 180° Tilt-and-Swivel Hinge Flexible Positioning
6. Wide Compatibility Routers, Access Points, Trimble Devices
7. Factory Tested Each Antenna Verified Before Shipmen