AURSINC VHF APRS RF Node for Direwolf, USB CM108 Sound Work for Direwolf & PPT Function, USB CP210x Com for SR110v Module (136-174Mhz 1W), Compatible for RPi 2/3/4/5

AURSINC VHF APRS RF Node for direwolfRunning digipeater, APRS IGate, and APR Stt gateway on windows & linux.
Hardware Interfaces: USB CM108 sound work for direwolf &PPT functionUSB CP210x com for
SR110v module (136-174Mhz 1W)Software is: github. com/jumbo5566/cm108direwolfWinLinuxVHFigategithub. com/wb2osz/direwolf/releases/download/ 1.7 /direwolf- 1.7. 0-9807304_x86_64.
zipHardware Interface Status Indicator: Only Green LED on is COM Mode for walkie_talkie_at_tool. htmlBoth Green LED and Yellow is for USB CM108 sound modeTypec different side have different functionCM108 sound mode for USB_Audio_FFT. html or direwolf pls set direwolf. confThe USB-C plug that comes with this device can be oriented two different ways: one way for running Direwolf/Allstar, and the other for programming the SR110V radio module. With the embossed text on the USB-C plug facing away from the "APRS igate" label, this device presents itself to the operating system as a CM108 sound card with a GPIO PTT port. This is how you use it with Direwolf/Allstar. Oriented the other way, it presents a serial device. This is for programming the radio module. Using the open-source "SRFRS" tool, you can change the RX/TX frequencies, bandwidth (wide/narrow), and CTCSS tones. That way, you can listen to the International Space Station's (ISS) APRS digipeater on 145.825 MHz# When the Windows version starts up, it displays something like# this with the available sound devices and capabilities: ## Available audio inp