ASCO 8221G011 Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1-1/2 in Pipe

The ASCO 8221G011 Solenoid Valve is a 2-Way/2-Position, pilot-operated valve designed to control the flow of water with a normally closed configuration. It is constructed with a brass body and features a slow-closing mechanism. This valve operates at 120V AC with a coil wattage of 6.1 W and includes both the coil and seals for installation. The valve also features an IP66-rated enclosure without a junction box, rated for use in corrosive, hazardous, indoor, and outdoor environments.

Key Features:

• - Valve Type: Slow-Closing, Pilot Operated
• - Valve Design: 2-Way/2-Position, Normally Closed
• - Body Material: Brass
• - Nominal Pipe Size: 1-1/2 in with NPTF inlet and outlet connections
• - Orifice Diameter: 1-1/4 in
• - Flow Coefficient (Cv): 3
• - Operating Pressure Differential (Water/Hot Water): 5 psi minimum, 150 psi maximum
• - Fluid Temperature Maximum: 180°F
• - Coil Insulation Class: F
• - Electrical Connections: 1/2 in conduit with 18 in leads
• - Includes Coil and Seal Material: NBR
• - Dimensions (Overall Length x Width x Height): 4-3/8 in x 4-1/4 in x 6-1/4 in
• - Environmental Ratings: Corrosive, Hazardous, Indoor, Outdoor
• - IP Rating: 66
• - Standards: CSA, UL Listed
• - Wattage: 6.1 W
• - Center Line Pipe Center Size: 4-3/16 in
• - NEMA Enclosure Ratings: 1, 2, 3, 3S, 4, 4X

. This item has been restricted from sale in the following state(s): []