ASCO 8210G073 Solenoid Valve, 2-Way, 2-Position, Normally Closed, 3/8 in Pipe

California Proposition 65: This product contains a chemical known to the State of California to cause cancer. California Proposition 65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

The ASCO 8210G073 is a pilot-operated, 2-way/2-position normally closed solenoid valve designed to control the flow of air, inert gases, and water. It features a brass body and NBR seals, a 3/8 in orifice, and NPTF inlet and outlet connections. The valve provides automated and remote flow control for air, inert gases, and water within the specified operating ranges (5150 psi for air/inert gas; 5125 psi for water; fluid temperature up to 180°F; ambient temperature 14°F to 140°F; 120V AC supply). The valve includes the coil and seal required for installation.

Key Features:

• - Valve Type and Configuration: Pilot Operated, Normally Closed, 2-Way/2-Position design
• - Flow Capacity: Cv of 1.5 with a 3/8 in orifice diameter
• - Material: Brass body with NBR seals
• - Connection Type: Inlet and outlet threads are NPTF
• - Electrical: 120V AC, 6.1 W coil wattage, coil included, with 1/2 in conduit hub electrical connections
• - IP66 ingress protection; suitable for indoor and outdoor use
• - Operating Pressure: 5 to 150 psi differential for air/inert gas, 5 to 125 psi for water
• - Temperature Ratings: Fluid temperature up to 180°F; ambient temperature range from 14°F to 140°F
• - Mounting Orientation: Vertical installation recommended
• - Dimensions: Overall height 3-15/16 in, length 1-15/16 in, width 1-11/16 in
• - Response Time: Approximately 1 second
• - Standards: UL Listed

. This item has been restricted from sale in the following state(s): []