FLUKE 27-II Industrial Multimeter F27-II/F-27-II.

Introduction: The NEW Fluke 28 II digital multimeter define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
Features: Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10, 000 µF capacitance range Frequency to 200 kHz Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II) Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II) Resistance, continuity and diode test Min/Max and average recording to capture variations automatically Peak min-max (28 II) Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II) New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments Designed to withstand 3 meter drop (with holster) Hi resolution 20, 000 count display mode (28 II) True-rms ac voltage and current for accurate measurements on non linear signals (28 II) Average responding voltage and current for measurements (27 II) New – Backlit keypad buttons allow for easy visibility in lowlit areas Large display digits and 2 level bright white backlight for increased visibility Reversible holster for added protection when not in use Withstands hazardous 8, 000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards Long battery life (800 hours) Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging for maximum flexibility Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks MSHA approval
Specifications: Accuracy specifications DC voltage
Range: 0.1 mV to 1000
V Accuracy:
27-II: 0.1
% +1; 28-II: 0.05 % + 1 AC voltage
Range: 0.1 mV to 1000
V Accuracy:
27-II: 0.5
% +3; 28-II: 0.7 % +4 DC current
Range: 0.1 µA to 10
A Accuracy:
27-II: 0.2 % + 4; 28-II: 0.2 % + 4 AC current
Range: 0.1 µA to 10
A Accuracy:
27-II: 1.5 % + 2; 28-II: 1.0 % + 2
Resistance Range: 0.1 O to 50 MO
Display counts:
27-II: 6000
; 28-II: 6000/19, 999
Capacitance: 1 nF to 9999 µF
Frequency: 0.5 Hz to 199.99 kHz
Temperature:
27-II: N/A
; 28-II: -200 °C to +1090 °C Low pass filter (Measurement on
VSD's):
27-II: N/A
; 28-II: Yes
Compliance: CAT IV 600 V, CAT III 1000V
IP rating:
27-II: IP
67; 28-II: IP 67
Power: Three AA batteries
Battery life: 800 hours General specifications
Display Bar graph/backlight: Yes/Yes Data storage
Peak transient capture: 250 µS (28 II)
Min/Max/Avg: Yes
Reading hold: Yes Other features
Relative readings (zero): Yes
Battery type: Three AA batteries Warranty and protection
Safety rating: CAT IV 600 V/CAT III 1000
V Mine Safety: MSHA
Approved External protection: Rubber holster
Drop test: 10 feet drop
test Dustproof/waterproof: Yes, IP 67 rated
Warranty: Limited lifetime
Size (HxWxL) with holster: 6.35 cm x 10.0 cm x 19.81 cm ( 2.5 in x 3.93 in x 7.8 in)
Weight with holster: 698.5 g ( 1.54 lb)