Hard Drive Docking Station, USB 3.0 Docking Station for 2.5 3.5 inch SATA HDD SSD, Hard Drive Enclosure with 12V Power Adapter, Support Maximum 18TB Hard Drive

Supported HDD/SSD:


FIDECO hard drive docking station can support all 2.5/3.5 inch SATA I/II/III HDD/SSD.

The maximum supported HDD capacity can reach 18TB. Please note that it cannot support any IDE hard drive.


Maximum 5Gbps High Speed:


Thanks to the USB 3.0 port, the maximum data transfer speed can reach 5Gbps. Transfer 1G files in just seconds!

Our hard disk docking station can be also backward compatible with USB 2.0 to meet your potential needs.


Compatible System:


FIDECO docking station is widely compatible with Windows XP/Vista/7/8/8.1/10/11, Mac OS and Linux. Just plug and play with no driver needed!


Easy Operation:


Absolutely no complex operation steps! Just insert your SATA HDD/SSD, connect the USB cable and power adapter respectively, and then turn on the power switch.


Smart Chip

Our docking station is built in with intelligent chip to maintain safe & stable data transfer with lower power consumption.


Compatible HDD/SSD

FIDECO hard drive docking station can work with all 2.5/3.5 inch SATA HDD/SSD, but it cannot support IDE HDD.


Useful LED Indicator

The red power light and 2 blue lights will be always on when the docking station is connected to your PC; the 2 blue lights will flash during data reading or writing.


Warm Note

For new HDD/SSD, please go to "Disk Management" to initialize it first and then your HDD/SSD can be recognized.

For partition, if the capacity of your HDD or SSD is over 2TB, please choose GPT partition.

Please back up all your data before formatting your HDD. For Mac OS, the format needs to be set as exFat.