The RCE12VB4 wires four marine electronics or accessories to a single 12V battery a fish finder, GPS, light bar, bilge pump, radio, or similar gear through four separate quick-connect leads. Unplug the whole kit for battery charging or storage, or disconnect a single device without disturbing the rest. It's sized for boats that need more than one connector but don't need a full 5-lead bank: bass boats, center consoles, and jon boats with a moderate electronics setup. Built with UL1426 tinned copper wire, heat-shrink-sealed butt splices, and corrosion-resistant quick-connects, it holds up to salt, spray, and vibration. Works with any 12V battery chemistry, including lithium upgrade from lead-acid or AGM without rewiring anything. A 100Ah lithium battery delivers roughly the usable capacity of a 200Ah lead-acid battery, so switching chemistries gets you more runtime from the same footprint. Start with this 4-lead kit and expand later with a trolling motor connector or the 5-lead CE12VB5FK as your electronics setup grows. What's in the box 4 x quick-connect leads Heat-shrink-sealed butt splicesBattery not included. Made in the USA by Connect-Ease.