Built for How Business Buys.
Your Browsing History
Meet Your Seller
10Pcs EC11 Rotary Encoder Switch Digital Potentiometer 20MM with Switch 5 Pins D-Shaft with Nut and Washer
Limited time offer, ends 08/29 By Kepler Forge
- Item #: 9SIVTKAM4A9677
- Mfr. Part #: Kepler-8.10-OYS-64
- Specification Adjustment method: 360-degree Number of pulses: 20 Pin Numbers: 5 Shaft Type: D Type Shaft Diameter: 6mm/0.24" Shaft Height: 20mm/0.79" Rated voltage: DC 5V Maximum operating current (resistive load):10mA Max Contact resistance: 100mor less(Voltage test at DC 5V 1mA) Bouncing: 10mS or less (Shaft shall be pushed at 1 cycles/s) Insulation resistance: 100M Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank) Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank) Push-life: 30,000±200cycles(0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour
+
+
Overview
Specs
Reviews
Rating: Rated
voltage: DC 5V;
Maximum operating current (resistive load): 10mA Max;
Contact resistance: 100mor less (Voltage test at DC 5V 1mA);
Bouncing: 10mS or less (Shaft shall be push at 1 cycles/s);
Insulation resistance: 100M Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank);
Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank);
Push-life: 30, 000±200cycles( 0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour
voltage: DC 5V;
Maximum operating current (resistive load): 10mA Max;
Contact resistance: 100mor less (Voltage test at DC 5V 1mA);
Bouncing: 10mS or less (Shaft shall be push at 1 cycles/s);
Insulation resistance: 100M Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank);
Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank);
Push-life: 30, 000±200cycles( 0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 60 days
- This item is covered by Kepler Forge Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...