All CategoriesBuilt for How Business Buys.
All CategoriesMeet Your Seller
3S 12.6V 100A Li ion Lithium Battery PCB Protection Board 3 Cells 11.1V Polymer Balance Function Charge Module BMS Circuit Protection PCB Board
Limited time offer, ends 10/25 By Kepler Forge
- Item #: 9SIVTKAM4A9243
- Mfr. Part #: Kepler-8.10-OYS-190
- The lithium battery protection board properties: Model: HX-3S-F100A Overcharge voltage range: 4.28v ± 0.05v Size: 70 * 60 * 8.5mm Over discharge voltage range: 2.5 ± 0.05v Upper working current: 100A (pay attention to heat) Operating temperature: -40 --- +50 ° Upper limit instantaneous current: 100-120A Storage conditions: -40-- +80 ° Quiescent current: less than 30uA Effective life: more than 30,000 hours Internal resistance: less than 300m Short circuit protection: protection, delay self-recovery. Equalizing current: 65 mA Charging voltage: 12.6V-13V Charging current upper limit: 10A T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, the solder joint should be removed next to the 0R resistance. Note: 3A current discharge products above, the battery discharge rate to 3C or more. Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A operating current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A operating current.
+
+
Overview
Specs
Reviews
The lithium battery protection board is used for charging and discharging protection of series lithium battery packs; When fully charged, it can ensure that the voltage difference between individual batteries is less than the set value (usually ± 20mV), achieving equal charging of each individual battery in the battery pack, effectively improving the charging effect under series charging mode; Simultaneously detecting the overvoltage, undervoltage, overcurrent, short circuit, and over temperature status of each individual battery in the battery pack to protect and extend the battery's service life; Undervoltage protection prevents damage to each single battery due to over discharge during use.
;
Quiescent current: less than 30uA, Effective
life: more than 30, 000 hours
;
Quiescent current: less than 30uA, Effective
life: more than 30, 000 hours
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 60 days
- This item is covered by Kepler Forge Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...